This option is only available if more than one Hard Drive is installed within the computer. In the below picture you can notice that we have 3 hard drives listed within this computer. Disk 1 has two partitions, which are C: and D: The hard drive's total space is 3 GB. Then Disk 2 has three partitions E:, F:, and G: and the hard drive total space is 6668, or 7 GB. As you notice in the below picture, there is also a Disk 3, this is actually an Iomega Zip Drive hooked up to the IDE controller on the Motherboard. Other media that is connected to the IDE controller within your computer will usually be displayed within FDISK; however, this is not a hard drive and does not need to be FDISKed, this is why 95MB is free. An exception to this rule would be a CD-ROM.
Change Current Fixed Disk Drive Disk Drv Mbytes Free Usage
1 3016 100%
C: 2047
D: 969
2 6668 1 100%
E:
2047
F: 2047
G: 526
3 95 95
%
1 3016 100%
C: 2047
D: 969
2 6668 1 100%
E: 2047
F: 2047
G: 526
3 95 95 % ( 1 MByte = 1048576 bytes)
Enter Fixed Disk Drive Number (1-3) . . . . . . . . . . . . . . . . . . . . . . . [ 1 ] Press Esc
to continue |
Back to Fdisk Simulation Main Menu | |
| Resolved |
Were you able to locate the answer to your questions?
|
| |
