USB Speakers to Normal Speakers/No sound!!!

[COMPCRAZI]

I was using Pleomax speakers(the usual kind that connect to the sound card )a while ago.They were just plug and play kind no software needed. They seemed to work fine . Then I replaced them with the USB speakers which also worked alrite(also plug and play). Then I remove the USB speakers and connect the old ones back on and now there is no sound. The computer doesn't even recognise that the speakers are connected and says no device.
When I try opening the sound control it gives me this error message saying "no sound mixers"
In the sounds and audio devices the volume, audio and voice parts are all greyed out In every part it just says No device
I found this answer before saying that I have to use the Run application and open the services.msc and check Windows Audio, I did and found it is started but still the problem persists
F:\Program Files\Belarc\Advisor\System\tmp\(Abdul-0fb168e59).html
On this link you'll be able to find everything about my comp
Please I need help ASAP

[Carbon Dudeoxide]

Welcome to ComputerHope.

Just a thought, try going to Control Panel --> Sounds and Audio Devices.
A new window should pop up. Make sure all your sound settings are set to the right devices and press OK.

This is assuming you have Windows XP

What Windows version do you have?

About that .html file, you can upload it here.

[Annon]

Try downloading and installing the latest audio dirvers.

Or:

Go to Start --> Run, and type in services.msc.

A window will pop up with a list of services. Scroll down to Windows Audio. Right-click and click on Properties.

Make sure that "Startup type" is set to automatic. Also, make sure, under "Service
status," start is selected.

[COMPCRAZI]

To Carbon Dudeoxide : Yes I have windows XP but the suggestion doesn't work
Here are the details of my comp:
Operating System    :Windows XP Professional Service Pack 2 (build 2600)   
System Model: Enclosure Type: Desktop
Processor a   
1.80 gigahertz AMD Sempron
256 kilobyte primary memory cache
256 kilobyte secondary memory cache   
Main Circuit Board b
Board: ONDA Technology Corporation. K8T890 Ver1.01
Bus Clock: 200 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 03/16/2007
[b]Drives   [/b]
79.98 Gigabytes Usable Hard Drive Capacity
65.59 Gigabytes Hard Drive Free Space
PIONEER DVD-ROM DVD-127 [CD-ROM drive]
Brother MFC-235C USB Device [Hard drive] -- drive 1
MAXTOR STM380811AS [Hard drive] (80.02 GB) -- drive 0
Memory Modules c,d
512 Megabytes Installed Memory
Slot 'A0' has 512 MB
Local Drive Volumes      
c: (FAT32 on drive 0) 14.99 GB 11.97 GB free
d: (FAT32 on drive 0) 19.99 GB 19.87 GB free
e: (FAT32 on drive 0) 19.99 GB 19.45 GB free
f: (FAT32 on drive 0) 25.00 GB 14.31 GB free
Controllers   Standard floppy disk controller
Primary IDE Channel [Controller] (2x)
Secondary IDE Channel [Controller] (2x)
Standard Dual Channel PCI IDE Controller
VIA Bus Master IDE Controller   
[b]Display [/b]
None detected
Bus Adapters   
VIA Rev 5 or later USB Universal Host Controller (4x)
VIA USB Enhanced Host Controller   
Multimedia
None detected
 
I hope that's enough information!!!!Please tell me you can help!!

To Annon:
Haven't tried installing the latest audio drivers but the other tip I have tried and I am sorry but not effective.
Do you know where can I find the audio drivers and which ones would be suitable for my computer

Please lemme know you guys...THX

[Carbon Dudeoxide]

Multimedia
None detected

Hmmm.... I don't think that's right....

Can you go to Device Manager and look for any Yellow Question Marks or Exclamation Marks.

[COMPCRAZI]

Yes there is this whole section of "other devices" with a yellow question mark and when you expand it there are three devices with yellow question marks and a lil exclamation mark:
-Multimedia Audio Controller
- USB Device
-Video Controller (VGA Compatible)

The usb device is the printer which is working fine the other two?

[Carbon Dudeoxide]

Well, since everything else is working, I would leave it for now.

However, the question mark next to Multimedia might be the problem here.

When you right click it, does it give you an option to update or install or something?
If so, click it.

[COMPCRAZI]

It asks me to install the driver but there was no additional cd or package that came with it so even if I click it to install it just says that the software wasn't found
 

[Carbon Dudeoxide]

If this is a pre-built computer (not custom built), go to the Manufacturers website, look for the right Computer Model and head over to Downloads and Drivers and install the appropriate Sound Card Drivers.