Computer Hope
Microsoft => Microsoft DOS => Topic started by: Helpmeh on April 16, 2009, 03:08:19 PM
-
In batch, a user will be entering a password to allow them access, but I want it so someone looking over their shoulder can't see the password (sortof like...not sort of like, exactly like password masking in VB)...
I saw this a while ago, but I can't find it anymore :-\.
I can use a 3rd party program, but it has to be a very small file size (as small as possible!)
-
Here (http://www.computerhope.com/forum/index.php/topic,69496.0.html) ;)
-
@echo off & setlocal %CheckPWD {[email protected] 2008-12-12}%
echo Password:
call :CheckPWD p1 123456 *
echo.
if errorlevel 1 (echo %p1% - No) else (echo %p1% - Yes)
echo.
echo Password:
call :CheckPWD p2 123456
if errorlevel 1 (echo %p2% - No) else (echo %p2% - Yes)
pause & goto :eof
:CheckPWD
setlocal & if "%~2"=="" exit /b 1
for /f "tokens=1 delims=:" %%a in ('findstr /nrc:"^e100 B7 2A 80" "%~f0"') do set /a n=%%a-1
more /e +%n%<"%~f0" | debug>nul
if "%~3"=="" x>nul
if "%~3" neq "" set c=%~3 & call set "c=%%c:~0,1%%"
if "%~3" neq "" x %c%
for /f %%a in ('x -o') do set "p=%%a"
endlocal & set "%~1=%p%" & del x.com & if "%~2"=="%p%" (exit /b 0) else (exit /b 1)
e100 B7 2A 80 3E 80 00 00 74 22 80 3E 80 00 02 75 06
e110 8A 3E 82 00 EB 15 83 E0 00 8E D8 80 3E 00 02 00
e120 74 6A BA 01 02 B4 09 CD 21 EB 61 83 E6 00 8E C6
e130 80 E4 00 CD 16 8A D8 80 FB 1B 75 08 26 80 26 00
e140 02 00 EB 48 80 FB 0D 74 37 80 FB 08 75 1A 83 FE
e150 00 74 DD B2 08 B4 02 CD 21 B2 20 B4 02 CD 21 B2
e160 08 B4 02 CD 21 4E EB C8 80 FB 21 72 C3 80 FB 7E
e170 77 BE 8A D7 B4 02 CD 21 26 88 9C 01 02 46 EB B0
e180 26 C6 84 01 02 24 26 C6 06 00 02 24 B8 00 4C CD
e190 21
nx.com
rcx
91
w
q
-
Here (http://www.computerhope.com/forum/index.php/topic,69496.0.html) ;)
Thanks macdad, but I'm afraid that won't work (or I don't know how it could work). What I happens is the user enter's their username, then their password. If the username and password don't match a line in a file, then the user tries again, or gives up...Is there a way that it can MASK the input (like in visual basic), instead of doing it letter by letter?
-
I believe it may be possible in VBScript.
-
I believe it may be possible in VBScript.
I know absolutely nothing (usefull) in VBScript...can you show me how to/make it?
-
I'm not knowledgeable in VBScript either. :P
I think Ghostdog is good with it though.
-
I'm not knowledgeable in VBScript either. :P
I think Ghostdog is good with it though.
So, should I post this in "Computer Programming"?
-
Your decision.
-
Your decision.
Just did. Thanks for your help macdad-!
-
I'm not knowledgeable in VBScript either. :P
I think Ghostdog is good with it though.
ghostdog will only suggest you:
- installs gawk, see my sig
- if you are able to download stuffs, you can use sed (check my sig for link).
- if you want to do programming/batching on windows, get a real programming language.
- Switch to *nix then.
-there are abundance of tools out there you can use. the unix Find command , which is ported to windows makes this kind of task seem trivial.
- and many more
-
That looks very hard to do. What is the ovjective?
You want the user to type in a passwrod at a prompt from inside a batrch?
The input must not have echo or just *** maybe?
The batch file can retrieve the password from some place the average user would not guess. Right?
-
ghostdog will only suggest you:
for your info, i do give solutions in vbscript sometimes. see here (http://www.computerhope.com/search.htm?cx=003411668307610607965%3Ah4yba8pbdco&cof=FORID%3A9%3BNB%3A1&q=ghostdog74+vbscript&sa=Search#1218).
- Switch to *nix then.
don't put words in my mouth.
as for your other comment, i can only say, I advocate using right tools for the job ->> productivity.
@helpmeh, see your other post (http://www.computerhope.com/forum/index.php/topic,81702.msg539994.html#msg539994) and also here (http://www.microsoft.com/technet/scriptcenter/resources/qanda/feb05/hey0204.mspx)
-
ghostdog will only suggest you:
- installs gawk, see my sig
- if you are able to download stuffs, you can use sed (check my sig for link).
- if you want to do programming/batching on windows, get a real programming language.
- Switch to *nix then.
-there are abundance of tools out there you can use. the unix Find command , which is ported to windows makes this kind of task seem trivial.
- and many more
He surpassed himself in the other thread about this topic started by Helpmeh, by posting a link to Experts Exchange (plus the inevitable Perl script)
gawk, or dawk?
-
He surpassed himself in the other thread about this topic started by Helpmeh, by posting a link to Experts Exchange (plus the inevitable Perl script)
gawk, or dawk?
so do you have a problem with that? or are you purposely being irritating? take a hike. (or take your medicine if you haven't)
-
so do you have a problem with that?
In a word, yes.
or are you purposely being irritating?
In another word, yes.
take a hike. (or take your medicine if you haven't)
Demonstrating that "Dawk" was an apposite comment.
-
In a word, yes.
until the day this forum specifically prohibits any kind of tools/languages to use except batch solution, you just have to suck it up.
-
It all gets me nearer to 5000...
-
That looks very hard to do. What is the ovjective?
You want the user to type in a passwrod at a prompt from inside a batrch?
The input must not have echo or just *** maybe?
The batch file can retrieve the password from some place the average user would not guess. Right?
I am trying to MASK the input at a prompt. I'm currently using set /p, but when a user enters their password, it shows up as letters. Someone could "casually" look over their shoulder and see their password. Like the Passwordbox in VB2008 replaces any entered letters with * (or dots depending on version).
So I should use gawk for this? Is it a single executable file (I won't be able to install anything, but I can place single .exe s in a file)?
-
Attached is a zip containing getpassword.exe which I wrote myself. To reassure yourself, do a virus scan before running. Crude but it works OK for a batch type project.
Writes the typed password into a file in the same folder called password.txt which you should read and delete immediately.
use it like this
test.bat
@echo off
echo Password demo
echo.
echo We will now ask for a password
echo.
getpassword.exe
for /f "delims=" %%P in (password.txt) do set password=%%P
del password.txt
echo the password typed was %password%
S:\Test\Basic\pword>test
Password demo
We will now ask for a password
Enter password : ***
the password typed was cat
[attachment deleted by admin]
-
Attached is a zip containing getpassword.exe
use it like this
@echo off
echo Password demo
echo.
echo We will now ask For a password
echo.
getpassword.exe
for /f "delims=" %%P in (password.txt) do set password=%%P
del password.txt
echo the password typed was %password%
THANKS SO MUCH!
-
So I should use gawk for this?
no.
-
no.
Thanks anyway, Dias gave me the solution.
-
I remember there was one member a year ago with "dog" in their username that was good with VBScript.
-
Is there not a thing you can call in a batch file that returns just a single char from the keyboard?
So you do some thing like this. (Written iN GOBL)
Get a key press
save it to a STRING variable.
generate a backspace
generate a
loop:
Get next keypress
if end of line then jump done:
add to STRING variable.
generate a backspace
generate a
goto loop
done:
-
Is there not a thing you can call in a batch file that returns just a single char from the keyboard?
So you do some thing like this. (Written iN GOBL)
Get a key press
save it to a STRING variable.
generate a backspace
generate a
loop:
Get next keypress
if end of line then jump done:
add to STRING variable.
generate a backspace
generate a
goto loop
done:
Should I put that the solution was found already???
Thanks anyway, Dias gave me the solution.
-
Should I put that the solution was found already???
Don't you already know I can not read?
-
Don't you already know I can not read?
I do...I just felt like rubbing it in...
-
@echo off
set RealPwd=Batcher
>"%tepm%\in.com" echo hP1X500P[PZBBBfh#b##fXf-V@`$fPf]f3/f1/5++u5x
set /p InputPwd=Enter password: <nul
for /f "tokens=*" %%a in ('"%tepm%\in.com"') do (
set "InputPwd=%%a"
)
echo.
if "%RealPwd%" equ "%InputPwd%" (
echo Correct password.
) else (
echo Incorrect password.
)
pause
-
*Modifies BCScripts Scripting Object to take a password char with ReadLn()*
-
Source code for program attached to post previously.
' password collector
password$ = ""
mask$ = "*"
PRINT "Enter password : ";
DO
DO
k$ = INKEY$
LOOP UNTIL k$ <> ""
kval = ASC(k$)
IF kval = 13 THEN
PRINT
EXIT DO
ELSE
PRINT mask$;
password$ = password$ + k$
END IF
LOOP
OPEN "Password.txt" FOR OUTPUT AS #1
PRINT #1, password$
CLOSE #1
SYSTEM
The only thing I had to do to make it work in both Freebasic and QBasic was to change this line
password$ = password$ + k$
the + string concatenation symbol is accepted by both compilers/interpreters, but the & character, which I at first used, only works in Freebasic.
Refinements might be to pass the wording of the prompt, the masking character, and the output filename as parameters. Possibly it might be better to avoid using a file for the typed characters by outputting the typed in text to stdout and using FOR to swallow it. However it's just a toy program so maybe there's not much point in all of that.
Also maybe it would be better, in the calling batch, to overwrite the file containing the typed in password, rather than just deleting it. E.g.
echo Hello World>password.txt
-
I remember there was one member a year ago with "dog" in their username that was good with VBScript.
i am sure it's not ghostdog.
madcad, i don't know where you get the idea that ghostdog is good at vbscript.
he even can't solve a simple coding requirement:
http://www.computerhope.com/forum/index.php/topic,79825.msg526693.html#msg526693
he only have a lot of generic code from google, but don't have the ability to modify it.
until the day this forum specifically prohibits any kind of tools/languages to use except batch solution, you just have to suck it up.
i don't think it's prohibited, when OP ask for a simple batch solution, i've seen too many reply of get a unix tools, and actually sick of it. for this password masking question, it's impossible to do in only batch, so there is some solution posted using .com,freebasic, qbasic, etc, so it's not prohibited.
as for your other comment, i can only say, I advocate using right tools for the job ->> productivity.
a tool is only useful in the right hand. the lack of creativity, logic thinking & coding ability does not result in high productivity even various tools is used.
-
This thread has gone far too long. But it draws lots of lookers.
This has all been done years ago and beaten into the ground. And if that was not enough, now we want to break off its tail after chasing it into shallow hole.
Look at Bill Stewart's Site :
How do I get user input in a batch file?
There are 3 basic answers to this question. The first one is my favorite because 1) I wrote the programs and 2) they provide the greatest amount of flexibility.
http://www.westmesatech.com/cmdprompt.html
And there are many others, who knows who did it first.
-
he even can't solve a simple coding requirement:
http://www.computerhope.com/forum/index.php/topic,79825.msg526693.html#msg526693
I don't see anybody else making an effort.
I have to agree that it get's old recommending various scripting languages all over the place, but that's no reason to try to shoot down a solution he provided- even if it doesn't meet the requirements- because his posts were the only ones trying to help the original poster.
yours just complain about it not working, and Dias's is telling you to calm down. A sentiment I must agree with.
-
@echo off
set RealPwd=Batcher
>"%temp%\GetPwd.vbs" echo WScript.Echo CreateObject("ScriptPW.PassWord").GetPassWord
set /p=Enter password: <nul
for /f %%a in ('cscript //nologo "%temp%\GetPwd.vbs"') do (
set "InputPass=%%a"
)
echo.
if "%InputPass%" equ "%RealPwd%" (
echo Correct password.
) else (
echo Incorrect password.
)
pause
-
i don't think it's prohibited, when OP ask for a simple batch solution, i've seen too many reply of get a unix tools, and actually sick of it. for this password masking question, it's impossible to do in only batch, so there is some solution posted using .com,freebasic, qbasic, etc, so it's not prohibited.
dude, the replies and solutions i posted is for the OP. the one to get sick or not is not you, but the OP. Oh, so you mean doing something in Freebasic, qbasic and converting it to exe and then putting it into a batch file is ok, but using tools like gawk.exe or sed.exe is not ok? I can convert the Perl code i posted to exe too, does that count? why don't you think out of the box?
a tool is only useful in the right hand. the lack of creativity, logic thinking & coding ability does not result in high productivity even various tools is used.
its worse when you have creativity, logic thinking & coding ability but without a good tool to use.
I am just about done with you. the last thing i want to say to you, if you are so free (to get sick), why don't you go fly a kite?
-
No, no there was one person about a year ago who was good at VBScript.
-
Dear Topic St artier, R U still there?
Hello, perhaps I had been hard or unkind. Please accept my apology.
Your code is difficult to understand. Good programming practice is to comment code and break it into smaller parts so as to help others to understand what you're doing. Also, when you go back to your code months later it will be easy to understand why you did a certain thing.
Yesterday originally the batch commands were intended for simple jobs like to to copy files to rename files and in find a certain types of files in the directories. Later, Microsoft added some more features to the command set. Many of these were simply extensions for code that was already inside the command interpreter. However, the extensions were not what we would call elegance or intuitive. The ability to search for substrate in the command line or again a text file is a rather awkward feature of the command language. It helps if there is a notation that helps others understand what you are doing when you're looking for substrate.
Also, the command language does not have, by itself, a graceful way to take input from the user. So some external program is often used for this purpose, one of these was the program called choice.com, which is not inside a the command interpreter, is actually another program that stands by itself.
To solve the password hiding questions, or any situation where you want to hide the user input, many programmers will suggest using one of the external programs to take the user input and either showed or nonchalant according to some switches the program accept.
Of course, there is awaited the using just the things that are inside the badge commands. But some today's parts so on orange furor that many people would choose not to do it that way.
A few years ago when MS-DOS was very popular people use the are ANSI system to write colorful images in the upper left corner every time he got a prompt. Sometime later this sort of thing faded from use, and she decided to become more familiar with a graphical user interface of Windows and no longer were interested in drawing pictures on the screen inside a DOS. However, the graphical capabilities of the ANSI system would make it possible for you to hide the user input and thus that would be one way to solve this problem. And it would not require any external programs. But it would require that the DOS would have to love the ANSI system before the station started.
Well, that is the end of my lecture for today. Thank you for listening.
By the way, any funny spelling or grammar is due to the speech recognition program. When I some long lecture together I give up on trying to the user keyboard. Bye for now.
-
By the way, any funny spelling or grammar is due to the speech recognition program. When I some long lecture together I give up on trying to the user keyboard. Bye for now.
AHHH! Now it all makes sense.
that explains a lot of spelling/weird words in some of your previous posts.
-
either showed or nonchalant
Monsieur Geek - 21h00 du soir, je pense que votre langue maternelle n'est pas l'anglais. Est-ce-que j'ai raison ?
-
I'm pretty sure that's french. something about his mother's native language? or Mother tongue?
-
Back on topic...
-
back on topic indeed.
my latest compile of BCScript and BASeParser XP have the ability to prompt for input via a password without any extra code. Just pass a pw character, and it does the rest.
-
Monsieur Geek - 21h00 du soir, je pense que votre langue maternelle n'est pas l'anglais. Est-ce-que j'ai raison ?
Voici est 11: AM et il est vrai, je suis un homme parlant anglais america. Est-ce que cela a un sens?
-
Voici est 11: AM et il est vrai, je suis un homme parlant anglais america. Est-ce que cela a un sens?
Je crois que chez vous l'heure est 11 du matin, mais votre nom d'écran se traduit comme "geek-21h00".
Vous parlez anglais américain, mais vous écrivez un peu comme quelqu'un qui parle une langue derivée du Latin.
Et de temps en temps, vous écrivez comme quelqu'un qui vient d'une autre planète:
But some today's parts so on orange furor
-
What he said is more or less:
I believe in you is 11 hours of the morning, but your screen name translates as "geek-21h00. You speak American English, but you write like someone who speaks a language derived from Latin. And occasionally, you write like someone who comes from another planet:
...from another planet
I have been told to avoid talking about my origin, All I am allowed to say here is that I am not of this world. But that is off topic anyway. You might start a poll on the forum about how many visitors you have like me. You could be surprised, The two of use are not the only ones.
-
Attached is a zip containing getpassword.exe which I wrote myself. To reassure yourself, do a virus scan before running. Crude but it works OK for a batch type project.
Writes the typed password into a file in the same folder called password.txt which you should read and delete immediately.
use it like this
test.bat
@echo off
echo Password demo
echo.
echo We will now ask for a password
echo.
getpassword.exe
for /f "delims=" %%P in (password.txt) do set password=%%P
del password.txt
echo the password typed was %password%
S:\Test\Basic\pword>test
Password demo
We will now ask for a password
Enter password : ***
the password typed was cat
I just found this out now, and this could annoy the people using the script...backspace counts as a key, and so does clicking the X button.
Backspace counts as:ÿk
-
if it annoys you, then modify it . you have the source code .
-
if it annoys you, then modify it . you have the source code .
It's an EXE file.
-
its done with QBasic / Freebasic. If you can download exe from the net, i am sure you can download qbasic/freebasic.
-
its done with QBasic / Freebasic. If you can download exe from the net, i am sure you can download qbasic/freebasic.
It's not a HUGE deal, I really don't want to download anything that's not absolutely nessasary. Like Dias said, crude but it works.
-
It's not a HUGE deal, I really don't want to download anything that's not absolutely nessasary. Like Dias said, crude but it works.
then how did you download Dias zip or exe? its still a download right? if you can make do with your slight annoyances then so be it.
-
then how did you download Dias zip or exe? its still a download right? if you can make do with your slight annoyances then so be it.
The EXE came in the zip attached to his post.
-
The EXE came in the zip attached to his post.
precisely, you fired up browser and came to this forum , to this thread and downloaded something. Its the same as you fire up your browser, go to the site where you can download qbasic, and then use it to modify your code and compile it. get it?
-
precisely, you fired up browser and came to this forum , to this thread and downloaded something. Its the same as you fire up your browser, go to the site where you can download qbasic, and then use it to modify your code and compile it. get it?
I looked at the code, and it was a fair bit confusing...I really don't want to learn another language, just to make something like 2% better...when chances are people won't be needing it anyway.
-
I just found this out now, and this could annoy the people using the script...backspace counts as a key, and so does clicking the X button.
Backspace counts as:ÿk
So what? Why are these problems?
-
backspace, after all, is a key.
-
Here (http://www.computerhope.com/forum/index.php/topic,69496.0.html) ;)
This avoids the Backspace and closing keys showing up.
-
This avoids the Backspace and closing keys showing up.
Thanks macdad, but I'm afraid that won't work (or I don't know how it could work). What I happens is the user enter's their username, then their password. If the username and password don't match a line in a file, then the user tries again, or gives up...Is there a way that it can MASK the input (like in visual basic), instead of doing it letter by letter?
-
helpmeh, i seen too possible ways of masking the input
First, Using a 3rd party program to add colors to the NT prompt, for example making the input line black on black,
Second, Using Getkey.com getkey.com accepts input in the form of one charachter at a time, the input as stored as the number of the letter on the keyboard and set into %ERRORLEVEL%
So basically it would be enterting the password 1 letter at a time, but instead of password the input and matching input from file would be something like 1273049048208202 , just a string of numbers.
-
helpmeh, i seen too possible ways of masking the input
First, Using a 3rd party program to add colors to the NT prompt, for example making the input line black on black,
Second, Using Getkey.com getkey.com accepts input in the form of one charachter at a time, the input as stored as the number of the letter on the keyboard and set into %ERRORLEVEL%
So basically it would be enterting the password 1 letter at a time, but instead of password the input and matching input from file would be something like 1273049048208202 , just a string of numbers.
THANKS SO MUCH!
Already solved...
-
ghostdog will only suggest you:
- installs gawk, see my sig
- if you are able to download stuffs, you can use sed (check my sig for link).
- if you want to do programming/batching on windows, get a real programming language.
- Switch to *nix then.
-there are abundance of tools out there you can use. the unix Find command , which is ported to windows makes this kind of task seem trivial.
- and many more
Found the old, Ghostdog, and yea he was good at VBScript:
http://www.computerhope.com/forum/index.php/topic,36934.0.html (http://www.computerhope.com/forum/index.php/topic,36934.0.html)
-
Found the old, Ghostdog, and yea he was good at VBScript:
the old ghostdog74 = gh0std0g74. and no, i am not really good at vbscript. i just know some to get by . :)