Computer Hope
Internet & Networking => Networking => Topic started by: stooge on October 16, 2006, 04:00:54 AM
-
Hey people im having major problems with my router, the computer im using now is connected into the ADSL modem and is not connected into the wireless router, no problems on this one.
My new computer is currently sitting idle with no internet connection which i run through the wireless router.
This setup has worked before but its suddenly stoped and i dont know why.
I have brought the other computer down stairs and literly put the receiver right next to the router and still nothing.
Then i tryed putting in a network cable from the router to the PC are the internet now works!!!
But thats dosnt help!!! i need it up stairs running through wireless.
This is bizare!!
-
Then i tryed putting in a network cable from the router to the PC are the internet now works!!!
Reconfigure security, channels and encryption on both the router and WNIC.
Nice drawing by the way.. Very.. Technical.. ;D
-
ty lol, was in a rush. Ill try that now
-
Start without security and encryption and work your way up from there. Introduce one variable at the time. (I really like saying that, thanks Fed! Or whoever said it first..)
-
did that, now im trying to get into my wireless receiver im trying the defualt ip for it , but connection is refused.
-
Try using DHCP first.
Tell me what steps you've taken so far and what type of driver software you're using.
-
allrighty ive got this far.
But why is it in red?
now i apply it the AP resets then the internet still dosnt work, and ive disabled the WEP on the router, so security shouldnt be a problem
-
Are you using an access point? :-? Now you've gone to something beyond my understanding.
Aren't you just connecting to a wireless Router with a wireless NIC?
-
sorry that the part i forgot on my picture!!
-
Alright, I have no idea how an Access Point works so I can't help you there. I suppose you'd have to tell the Router what and where the Access Point is..
-
I think you might need to explain to us the settings available on the AP, and the setting pertaining to APs that are available on The WI-FI-Router
How about you post the make and model of the AP and router
-
Why are you using a WAP? Is the wireless router so far away that you need one to pick up a signal? :-?
Alan <>< :D
-
:D
Hi to all
dear , first you must sure that there is awireless connection between pc2 and the router ....
by using steps below :-
1- use wireless adapter like D-link or so that in pc2 or if it is found reinstall it with its CD
2-at pc2 let ip (TCP/IP) property be at DHCP
3- you have not put MAC at router
4- reset ( push thr back button of th router then take off the power
5-restart both pc2 and router
tell me .......
-
modem ----> router --------> all PCS, wired or wireless
Your drawing does not indicate that, and the access point confuses the issue. Remove it for now until we see if that is even needed. What version of Windows and service pack?
And I introduced the "one variable at a time" response. Thanks, Raptor. ;)