Computer Hope
Hardware => Hardware => Topic started by: FilluX on March 17, 2008, 08:17:07 AM
-
Hi again! i have now got the cpu (q6600 go) at 3.0 ghz, and temps are fine, (rightmark cpu clock utility says 34 C)
Now what voltages and which should i set to what if i wanted to go to 3,2-3,6 ghz?
This is what it looks like now
(http://img183.imageshack.us/img183/6034/12326848er1.th.jpg) (http://img183.imageshack.us/my.php?image=12326848er1.jpg)
I have not run prime 95 with these settings, but a software called "cpu stab test" i have run for about 30 min and the temps where at max about 40 if i remember, and no problm running 3dmark 06 and after 2-3 hours of playing F.E.A.R, no problems, so i guess i could go a bit higher.
So what should i set the settings to? ( including fsb's and so on )
Thanx!! :)
-
Sro for double post, but it is kinda strange, when i had oc'ed it with ai booster (software that came with my mobo) to 2,8 ghz, and the gpu a little bit i got 12400 in 3dmark06, now with 3,0 ghz and maybe a little bit or the same oc on the gpu i get about 11700 :E
Why?