Computer Hope
Hardware => Hardware => Topic started by: elfy632 on July 21, 2008, 08:59:04 AM
-
i have looked through the FAQ database and a couple of people have a similar problem but their answers wont fix my computer. what the problem is when i switch my computer on the first boot screen you see where all the drives and memory come up nothing appears on mine Ive tried changing the hard drive, boot disks, repair CD, and nothing happens nothing will make this computer start can you help me!?
-
welcome to CH forums. more info pls?
did you make any recent hardware changes before this occured?
-
Is the computer plugged into a ups or power strip? Connect the computer directly into a known good (try a lamp) wall outlet.
Does the computer have a power switch on the power supply? Is it on?
Can you hear anything from the inside of the computer - fans, etc? Any lights on?
Is the monitor connected to the computer and plugged directly into a known good wall outlet? Is the monitor switched 'on?' Try a different monitor, if possible.
The power supply (psu) could be bad. Try another psu - use at least the same wattage as the psu currently in your system.
Good luck - post back.
-
i havent got a problem with the power or the monitor they both switch on, its when the computer starts up and you come to the first screen where it tells you what drives are in the computer and the memory none of that appears like as to say there is nothing plugged in on the motherboard but ive check all the connections and replaced cables and it wont load
-
...more info pls
did you make any recent hardware changes before this occured?
-
Does the computer have a power switch on the power supply? Is it on?
Can you hear anything from the inside of the computer - fans, etc? Any lights on?
-
Is anything recognized in the actual BIOS? Just for the heck of it, you might want to remove the CMOS batter for about 10 minutes and then replace it and try booting up again.
-
i have just tried taking the battery out but the computer is still not loading and i cant get into the bios atall and no drives are recognised im really puzzled ive built loads of computers and this has never happened
-
i havent got a problem with the power or the monitor they both switch on,
re-seat the CPU and the memory.
-
Ive just tried reseating the CPU and the memory but this time it did do something, now the computer finds the bios and what processor there is but i cant access the bios and no drives are found and still wont load
-
Try a PS/2 keyboard.
-
keep pressing F12 i think it was, whilst BIOS screen flashes.
-
ive tried every thing that has been suggested and my computer is still dead has any one else got any ideas the only thing i can think of is changing the motherboard