Computer Hope
Software => Computer software => Topic started by: Kurtiskain on January 14, 2009, 12:43:02 AM
-
Hi guys
I was wandering through my speedfan today and came across the Exotics tab.
All looked fairly normal (CPU temps were through the roof as were HDD temps at I only have the CPU fan running at the moment and both side panels off, and backing up to 2 20GB drives all my important stuff for when my new build arrives. And for lack of room in my case...there are 4 7200RPM drives stacked on top of each other...gets kinda hot :P
anyway that was when I came across what I put a big red box around in the screenshot.
Percentages on HDD'S??
What on earth does it mean?
It's the first I've ever seen of it...any insight would be most appreciated :)
[attachment deleted by admin]
-
As far as I'm aware, those percentages relate to the health of the drives. I'm not 100% positive on this, but when I discovered it myself a few weeks ago (been a while since I'd used Speedfan before that) it seemed to roughly correspond with the drive's health/performance ratings in the SMART tab.
Remember that the Exotics feature, as it says at the bottom, is still in beta stage, so it may not even relate to anything.
-
Okay that seems entirely possible :)
I did in depth analysis of all the disks though and they all was 99%-100% for either fitness or performance, but not both, ie one was 99 one was 100...so 94% on two drives doesn't seem right...i know they aren't all 94%+ full...one has at least 10GB left and is only a 20GB drive
-
They are the equivalant of SMART readings...they have nothing to do with the amount of used space.
-
They are the equivalant of SMART readings...they have nothing to do with the amount of used space.
Ok thanks guys :)