Computer Hope
Hardware => Hardware => Topic started by: cmikec1 on August 02, 2008, 07:37:41 AM
-
I have a P4 2.8 processor and yesterday it locked up. My wife tried to restart and nothing only a black screen no beeps nothing. I removed the processor and reinstalled it restarted ok run for app. 1 hr. and locked up again. How do I determine if its a processor problem or a mother board problem.
-
It could be an overheating problem.
Download Speed Fan (http://www.almico.com/speedfan.php).
Install it and then run it.
Post the temperatures at Idle and about the time it starts locking up.
-
It could be an overheating problem.
Download Speed Fan (http://www.almico.com/speedfan.php).
Install it and then run it.
Post the temperatures at Idle and about the time it starts locking up.
When the computer locks up it will not restart until I remove and reinstall the processor everytime, do you still believe this could be a temperature problem.
-
When the computer locks up it will not restart until I remove and reinstall the processor everytime
Hmmm.....did you try leaving the computer for a while before reinstalling the processor?
It is possible that, by the time you reinstall it, it has cooled down.
However, it there might also be another cause.
-
I tried to remove and reinstall the processor last night when I got home and it freezes as soon as the logon screen comes on now. and when I reboot I get only a black screen.
-
You sure you did it correctly?
Do you have the Windows XP CD?
-
The processor will only go in one way. I can't even get the computer to boot to anything the monitor even goes to sleep. This started with the computer freezing and now it acts like I have no processor or the mother board could be bad. I get no beeps I can't boot to anything including a CD rom or even get to the BIOS.
-
That isn't good...
When you turn the computer on, what happens. Full Details.
-
Nothing the monitor goes to sleep, the CD and DVD drives light up the hard drives start spinning but nothing else. The power light stays on thats it.
-
Did you clean the CPU and re-apply Thermal Compound ? ?
This is important.
-
Yes I cleaned the processor and blew off the board with dry air (caned) then reinstalled thermal compound between the heat sink/fan and processor.
-
Thanks for the help I replaced the Mother Board and I'm back up and running.
-
As long as you got it working. Congrats.
If you need anything in the future, you know where to find us. ;)