Computer Hope
Hardware => Hardware => Topic started by: Tuoze on May 15, 2010, 02:26:17 AM
-
Hi!
I had this kind of HP Compaq (dc7100 SFF) computer:
(http://img196.imageshack.us/img196/4706/olduh.jpg)
I decided to upgrade it a little bit. I bought relatively new graphic card (Asus HD 4670 1GB) and new power supply (Modecom Premium 500w). My old 400w power wouldnt fit to HP motherboard and i hoped that HP would have newer pins than my old power suplly. I was wrong, old and new power supply use standard ATX 24pin and HP has itīs own small 24pin cord.
So I bought "20pin to small 24pin" -adapter from Ebay. I plugged it to both ends but nothing happened. I tested adapter and electricity run normally trough adapter. Both ends fit perfectly so problem must be with order of cords in adapter. If I only could know amount of voltages in cords so that I could possibly change order of cords. My dad is electrician so he could help me out ;D
(http://img100.imageshack.us/img100/3643/puts.png)
Can anybody help me with any part of this problem??
Here are some pics:
(http://img692.imageshack.us/img692/299/wholeset.jpg)
(http://img41.imageshack.us/img41/8543/smallpin.jpg)
(http://img132.imageshack.us/img132/6213/powers.jpg)
(http://img245.imageshack.us/img245/8104/pinsg.jpg)
(http://img193.imageshack.us/img193/7278/93850849.jpg)
(http://img156.imageshack.us/img156/9717/adaptero.jpg)
(http://img16.imageshack.us/img16/8702/completevy.jpg)
EDIT: Testing if images work.