Computer Hope
Microsoft => Microsoft Windows => Windows Server => Topic started by: Ryuk on July 29, 2012, 04:20:36 PM
-
I made a virtual 2003 Server or 08 Server on my main machine that I use. Thing is that I'm installing AD,Intergrated DNS an setup a DHCP scope. Turned off DHCP on the Router an when I try joinin a client I get 23D3 as a stop code. I had no issues when I first setup the actual thing but, I done this too see where the issue is at.
-
Good evening Ryuk and welcome back
OK so is it 2003 or 2008 and am i safe to assume it is 64 bit and what RC is it?
What VM are you using?
Is this server already joined into a domain?
Am I safe to assume the BOX meats all MS hardware req?
What is the total error "23D3" is not ringing any bells with me.
Hope to hear from you soon, Mike
-
its the 86X verison. Microsofts Vitrual Machine. The server its self physically does. 0x000023D3 is the stop code
-
its the 86X verison. Microsofts Vitrual Machine. The server its self physically does. 0x000023D3 is the stop code. Its 2003 Standard R2
-
Not sure why, I cant edit my posts but, this is the stop code. 232D
-
This should be good...
-
Good evening Ryuk
Sorry I didn't for get about you I have been thinking and searching. I am not trying to be a wise guy ;D but I am assuming this is a typo 0x000232D3 because I am not finding a whole lot on this. Everything I can find is on 0x000023d3.
Can you log into the system get into the event log. The error mainly points to a memory error. Either from wrong size page file (incorrect values) a virtual memory error with in the Virtual OS (from bad reg modification) and this is not mentioned but maybe there is a real physical memory issue.
I have to find the other links but here is one http://support.microsoft.com/kb/325044 (http://support.microsoft.com/kb/325044) this is not a dead ringer but maybe this will help you find the problem. The odd part is only getting the error only when joining a PC to the server. I still will keep on digging too.
All IP info is correctly set on router / PC's / server. Am I safe to assume the server is the only DC or is the server already joined into another domain.
I hope this helps some,
I am still thinking, Be back soon. Mike
-
Good evening Ryuk
Sorry I didn't for get about you I have been thinking and searching. I am not trying to be a wise guy ;D but I am assuming this is a typo 0x000232D3 because I am not finding a whole lot on this. Everything I can find is on 0x000023d3.
Can you log into the system get into the event log. The error mainly points to a memory error. Either from wrong size page file (incorrect values) a virtual memory error with in the Virtual OS (from bad reg modification) and this is not mentioned but maybe there is a real physical memory issue.
I have to find the other links but here is one http://support.microsoft.com/kb/325044 (http://support.microsoft.com/kb/325044) this is not a dead ringer but maybe this will help you find the problem. The odd part is only getting the error only when joining a PC to the server. I still will keep on digging too.
All IP info is correctly set on router / PC's / server. Am I safe to assume the server is the only DC or is the server already joined into another domain.
I hope this helps some,
I am still thinking, Be back soon. Mike
I PMed you the actually error code an posted here too. 232D is the actual error I didnt recall right off. I set everything right, I'll check the router again though. This is currently, the only one that Im attempting to get working right know.
-
I left deco on the router so it could issue the ip. I turned it off an still have the same issue
-
can someone help? I still havent been able to get this working
-
I think that I need to point the client to the Server an make sure that the SERVER is useing the loop back for DNS
-
Resolve the issues with the actual server it seem that I need to give the client the DNS number of the server and make sure that the server handle loopback as the DNS. I was able to successfully join them