Computer Hope
Hardware => Hardware => Topic started by: tom373uk on January 19, 2016, 10:56:56 AM
-
Hi Don't know whether anyone can adivise me what to do to correct this problem ie When I switch on my PC and the Monitor the amber light turns to green,instead of Windows loading the screen stays dark,but you can see the screen rolling[the controls are as follows 1 Off/On Switch 2 Menu 3 Contrast 4 Brightness 5 two up and down buttons 6 OK Button.The only way I can get Windows to load is to unplug the kettle plug from the back of the monitor and plug it back in,Windows then loads.None of the controls appear to be working.The Monitor is connected to the PC & Monitor by a Standard D Sub fitting at each end.
I would like to be able to start afresh ie back to default settings but cant find a way to do so in the online manual for this monitor.
Any help or advise appreciated.
Michael
-
I would try a brand new cable as moving it seems to rectify it temporarily.
-
tks for your reply replaced both the power and D Sub cables made no difference,so must be a fault somewhere in the monitor,so its confined to the tip.