Computer Hope
Hardware => Hardware => Topic started by: aldsam on April 30, 2007, 02:38:47 AM
-
Guys need your help as soon as possible.
i want to overclock the pc of my cousin but i dont know how becoause in cmos setup it cannot be change maybe ill do this in mobo there is a dip switch but i dont know how to adjust that 6 jumper dip switch from 1 - on 2-off 3-on 4-off 5-on 6-off the setting of sw1 is like that;
mobo acer - V66M
RAM - 128 mb
os - xp
bios - acer v.2.1
HD - 20G
i want to make my multiplier 5.0 how do i adjst my dip switch
appreciate in advance
madman
-
This is a dead computer waiting to happen. With 128 meg. RAM, shouldn't that be addresses first? What processor is in there?
-
http://www.uktsupport.co.uk/acer/mb/acv66m.htm
You Cpu multiplier is probably locked when designed.
You could toy with the fsb.May not get anywhere
there either.
I am assuming you have a slot-1 CPU ,and I don't recommend
BIOS upgrades.
So, leave it as is.
-
okey! thanks for the reply, you mean it is locked or fix it could not be overclock this?
-
aldsam ..... It's entirely possible that the mobo you have may not support overclocking . I would find the manual for the board and it should tell you if it can be overclocked , as well as an explanation of the dip switch settings.
If it turns out it can be overclocked , proceed with caution or you will have a doorstop.
I just looked it up and I don't believe you can overclock that board ...as has already been suggested.
dl65 ::)
-
You don't have enough memory to properly run XP.
XP will function somewhat on 256MB but will be much happier if you can give it 512MB.
Use the memory configurator at Crucial, Kingston, etc. to determine what type and how much memory your machine will accept.
-
Nahhh , I don't think you wnat to
-
Nahhh , I don't think you wnat to
I think he should decide what he wnats to do or doesn't wnats to, Honve!
-
Put Win2K on there and another 128 of RAM and be done with attempting OClocking....
-
;D :D :o you guys thank for the comment that you've given to me.
maybe i just change the os from xp to win98 or 2000 nothing i can do overclocking my pc. k thanks guy
-
And add some RAM...travel to Crucial .com to see exactly what fits for that machine.