Computer Hope
Hardware => Hardware => Topic started by: bleachycd on July 18, 2007, 01:23:22 AM
-
I have a EMachineW3107 that is a couple of years old ??? (I think)
Anyways, I can't turn it off by the button, I have to unplug it but when I plug it back in, it's still on, I guess it hasn't finished the shut down command, I really don't know but of course it won't do anything.
It won't shut off, that's my problem.
Any help would be appreciated.
Thanks, CD
-
Hey there CD,
I had that problem some years ago and I found that the drastic step of formating and then replacing Windows fixed the problem for me - I was running 98SE at the time. Having said that, it could be a hardware problem rather than software - not much help I'm sorry. For future reference I have found that shutting down running programs using the 'file - exit' function rather than the 'X' in the top r/h corner preserves the integrity of your software and helps to keep your Operating System stable. Some will scoff at that but I have found it works over time. Perhaps see a Tec regarding the power down issue before formatting.
Regards
Tony
-
Why u turn off computer by pressing button.It can't turn off from computer.(start& then shut down)
-
Why u turn off computer by pressing button.It can't turn off from computer.(start& then shut down)
That's the way I tried to shut it down but it wouldn't shut down so I unplugged it. Now when I plug it back it, it's still on, it won't shut down.
Thanks Tony but I can't get back on the puter to do anything with it LOL
CD
-
Can u check the cable of power sw is on theri place (motherboard) or open? ???
-
Can u check the cable of power sw is on theri place (motherboard) or open?
I'm afraid I don't know where to look, can you tell me??
Thanks
-
Tell the specification of your pc specialy about your motherboard.
-
hey bleachycd
just open your pc case & check the cable as shown in picture is inserted onto the board or not.Just see the power sw & reset sw only
http://www.pctechguide.com/images/tutorials/MBoard/Power.jpg
-
Heya CD.
Are you just pressing the power switch or are you holding it in for a bit? Most BIOS are set to default that a power switch held in for something like 5-6 seconds should force a shutdown. If you've tried that then just ignore me. ;)
-
Sounds like the power switch itself has gone bad...
-
Heya CD.
Are you just pressing the power switch or are you holding it in for a bit? Most BIOS are set to default that a power switch held in for something like 5-6 seconds should force a shutdown. If you've tried that then just ignore me.
Thanks so much, that worked, guess I'm to impatient.
Thanks to everyone with answers!!
CD
-
Will the computer now shutdown normally by clicking start/shutdown?
-
Will the computer now shutdown normally by clicking start/shutdown?
Welllllllllllll I don't know Fed, because it won't boot up now LOL I think it's fried!!
I had taken the hard drive out to use in this puter I'm on now and when it shut down by holding the swith I put my harddrive back in a little bit ago but it still won't work.
I can shut it down with the switch and turn it on with the switch but it just won't boot up now :-[
Thanks for the info though.
CD