Computer Hope

Other => Other => Topic started by: Jon McFarland on April 20, 2004, 03:22:50 PM

Title: Verifiying DMI Pool Data.....
Post by: Jon McFarland on April 20, 2004, 03:22:50 PM

When i turn on my computer it stops at a message saying "verifying dmi pool data...." and will not load up any further.  i have tried several different tasks to try and fix this including clearing the cache, resetting bios to defaults, clearing the cmos, updating my bios with an awd flash installer from the mainboard manufacturer as well as using fdisk on the mbr.  Does anyone have any other solutions short of reformatting my hard drive and losing everything?

Title: Re: Verifiying DMI Pool Data.....
Post by: dl65 on April 20, 2004, 04:11:20 PM

Jon.....I think that message indicates you may have a hardware issue or problem....have you added or deleted any hardware recently. Go to the following link and you may find the solution.
http://support.microsoft.com/default.aspx?scid=kb;en-us;q287553

Hope this helps
dl65  ???

Title: Re: Verifiying DMI Pool Data.....
Post by: PCgeek8080 on July 21, 2004, 01:03:13 PM

How can it help if his computer stops loading?

Title: Re: Verifiying DMI Pool Data.....
Post by: Raptor on July 21, 2004, 01:38:11 PM

If I encounter that error, it means my hard disk is not properly set (Usually due to my BIOS being reset).

You could try to configure your hard disk(s) in the BIOS. Set it from Auto to LBA, Large or CHA