Computer Hope
Hardware => Hardware => Topic started by: rjbinney on August 19, 2008, 10:58:15 AM
-
I have a Dell Latitude D620.
Because I travel so much, I don't use the OEM power brick, I have a Kensington Universal adaptor (great for cars, planes, etc.).
Well, beginning last night, it no longer charges the machine when it's plugged in. It has to be held in place with a little upward pressure (i.e., putting a soda bottle cap underneath the male end).
An original Dell power brick works just fine.
So... something has changed that makes a loosey connection with the non-OEM, but the OEM is A-OK. Any thoughts on a) what might have happened, b) can it be permanently fixed?
(The soda bottle cap trick works when I'm sitting at a desk, but it means I can't charge it when the computer's in my briefcase, or on a plane or car, etc....)
-
I've also noticed the block seems to be warmer than usual...?
Could this be location-specific, or am I doing something very, very bad?
-
These adapters will get warm...and that's normal...
However, it's better to use an adapter provided by the manufacturer...rather than a universal one. Any attempts you make to fix it will only result in a temporary fix...the problem will still persist.
If I were you...and the adapter is not that old, I'd contact the manufacturer for a warranty replacement...or contact the manufacturer for the correct adapter you need.