Computer Hope
Microsoft => Microsoft Windows => Windows XP => Topic started by: jamesb on October 29, 2009, 08:57:23 AM
-
I have an acer aspire 1640 running xp home. Recently when I switch it on i get a loud double beep, and an option to press f1, load as normal, or f2, for options. when try f1 i get a blue screen error. when ive done f2, then f8 it sometimes and sometimes doesn't let me run safe mode or debugging mode. On one of the times it let me I ran a full slow scan and it found no threats. I run AVG. The times it doesnt let me load up safe or debugging mode I also get a blue screen error.
The error is
PAGE_FAULT_IN_NONPAGED_AREA
then below
stop 0x00000050 (0xF7FCEA00, 0x00000000, 0x805F9BC8, 0x00000000)
w29n51.sys -- Address F7FCEA00 base at F7FCEA00, Datestamp 00000000
Please let me know what i need to do to rectify
Any help would be most appreciated
Regards
James
-
Hi James
Most of the Times the Bips are " Error Messages" from PC .
On Manual there are no info.
Most of Times the bips are direct "connect" to Mother Board Issues .
Hope that Helps
-
Download and run a memory diagnostic utility. Could very well be faulty ram. As for the beep codes, go to the website of your bios manufacturer and check them out.
-
thanks for your replies, please could you gove me a few suggestions for the various things you advised that i use
James
-
Download and run a memory diagnostic utility. Could very well be faulty ram. As for the beep codes, go to the website of your bios manufacturer and check them out.
-
0. Check the memory first.
1. Memory Diagnostic. To create and boot a "free" memory diagnostic from CD, follow the "excellent" instructions laid out by Broni in "Reply #1" of this thread (http://www.computerhope.com/forum/index.php/topic,93313.msg631055.html#msg631055) (after the disk diagnostic paragraph.)
2. w29n51.sys file. This is Intel's wireless driver. Next time you're able to enter "Safe Mode", use Device Manager to "disable" the built-in wireless network adapter (so its driver doesn't load). Hmmm... why would it's driver be loading in Safe Mode. Are you booting to "Safe Mode with Networking"?
With the built-in wireless disabled, reboot and see if issue went away.
If it did, check to see if updated driver available for the wireless. See Intel Wireless Networking Drivers and software (http://www.intel.com/support/wireless/wlan/sb/cs-010623.htm).