Computer Hope

Hardware => Hardware => Topic started by: Ryuk on March 18, 2013, 05:22:47 AM

Title: Dead Board?
Post by: Ryuk on March 18, 2013, 05:22:47 AM

I have an Intel Socket 478 PENT 4 Mother Board.  When I go to start the unit up there are no beeps, post or anything.  The south bridge seems too get overly warm and I just tried changeing the PSU too see if it would fix some of the issues I had with it as far as IDE Devices.  I tried to use a PCI Video card an still the same thing too

Title: Re: Dead Board?
Post by: Ryuk on March 26, 2013, 06:50:08 AM

I tried takeing out the RAM and it beeps.  It saying it gets power and some red light comes on at the bottom too.  Its an Intel Board but. there are several numbers so Im not sure which, one it is.

Title: Re: Dead Board?
Post by: ThomasTheXPUser on March 28, 2013, 09:34:27 PM

Do you have another RAM module you could try? I'd begin there first before thinking anything is wrong with the board per se.

Title: Re: Dead Board?
Post by: Ryuk on March 30, 2013, 10:32:55 AM

I tried another stick same thing