Computer Hope
Hardware => Hardware => Topic started by: Teresa Nieves on July 27, 2004, 09:36:28 AM
-
:-[ ???
My floppy drive died. How do I change it (if possible, step-by-step, please)? Thanks.
-
1. Turn off computer
2. Open case
3. Remove connecters at back of floppy drive
4. Remove screws holding drive in place
5. Slide drive out
6. Insert new drive
7. Replace screws
8. Attach connecters
9. Close case
10. Turn on computer.
-
Thanks so very much! :D
-
One more question re install floppy. Do I have to format drive, get drivers, etc., or the PC detects it? Thanks.
-
The PC should auto detect disk drives.