Computer Hope

Hardware => Hardware => Topic started by: SHENGTON on October 04, 2007, 09:18:04 PM

Title: What's this 90nm Technology in processor?
Post by: SHENGTON on October 04, 2007, 09:18:04 PM
What's this 90nm Technology in processor?
Title: Re: What's this 90nm Technology in processor?
Post by: Jess607 on October 04, 2007, 10:51:21 PM
It's basicly the size of the transistors and the process they perform.
The lower it is, he lower the temperature of the core gets, because the less heat they make.
Title: Re: What's this 90nm Technology in processor?
Post by: SHENGTON on October 05, 2007, 04:23:58 AM
Ahh ok...Thanks sir! :)
Title: Re: What's this 90nm Technology in processor?
Post by: Alex.ZeeM on October 05, 2007, 05:48:42 AM
whats the difference between sata hard drives and IDe hard drives?
Title: Re: What's this 90nm Technology in processor?
Post by: contrex on October 05, 2007, 06:06:59 AM
whats the difference between sata hard drives and IDe hard drives?

Don't add a new question to an existing thread.

Title: Re: What's this 90nm Technology in processor?
Post by: Carbon Dudeoxide on October 05, 2007, 06:18:00 AM
whats the difference between sata hard drives and IDe hard drives?

Don't add a new question to an existing thread.
You could ask your question here:
http://www.computerhope.com/forum/index.php?action=post;board=5.0 (http://www.computerhope.com/forum/index.php?action=post;board=5.0)
Title: Re: What's this 90nm Technology in processor?
Post by: Dead_reckon on October 05, 2007, 10:49:30 AM
the 90nm architecture is the size of the die in the CPU, the size of the die directly affects the amount of wattage the CPU eats, 90nm = 90w = toasty CPU. pentium four prescott's where extremely bad about heat, i believe there die size was 110 or 120 when they canceled them. newer dual core processors use a 65nm architecture, meaning they only eat 65w, they run quite cool because of this, and are becoming ideal for laptop and portable computing usage, they provide some serious computing power to both desktop and notebook users, with low heat generation, and, low power consumption. as a note, the average CPU (77-90nm) produces more heat per square inch than a stove eye, keep in mind, overclocking will produce even more heat, thus, even more cooling is needed, but, when overclocking you also have to realize, you increase the strain on not only your CPU, but your RAM, and system bus, which can effect video cards, PCI devices, and many other things. overclocking isn't a good idea unless you have a really high end system and monitor system stability a lot, stressing a system in the wrong ways is usually quite bad. 
Title: Re: What's this 90nm Technology in processor?
Post by: contrex on October 05, 2007, 02:01:14 PM
the 90nm architecture is the size of the die in the CPU, the size of the die directly affects the amount of wattage the CPU eats, 90nm = 90w = toasty CPU. pentium four prescott's where extremely bad about heat, i believe there die size was 110 or 120 when they canceled them. newer dual core processors use a 65nm architecture, meaning they only eat 65w

You were right later on, Dead_Reckon, but that part of your answer is complete nonsense. Sorry, but it is. A cpu die is much bigger than 90 nanometres! Did you actually think about what you typed?

I am off to watch Rebus on the telly so I'll explain exactly why tomorrow.