Computer Hope
Hardware => Hardware => Topic started by: squall_01 on March 14, 2008, 03:51:09 AM
-
Pentium 4 Socket 478, Intel SE7210TP1-E Sever Board, DDR RAM 1 GB, SATA Drives 160 GB 300 GB, HDA Digital X Mystique 7.1 Gold, Radeon X1300
I'm having problems since I have changed this over too a new board. I tried both usb headers and the front usb still aren't working an I'm plugging them accordingly
-
I tried disconnecting it and reconnecting it
-
Any idea's? I'm not going to stand up an say you fail at life for not answering.
-
You fail! :-X
-
Kdding? Anyone?
-
Is it possible for them to go bad even thought there pluged into the header correctly?
-
I have AN HP A600Y that had all of the usb ports dive suddenly. Turns out the usb controller chip died. I had to install a usb pci card.
-
Sorry, meant to say died suddenly :P.
-
Well the back ones work. Wont they die too?
-
what do you see in device manager under usb? Also are you using a known good cable between the front ports and the mobo? Also have you tried more than 1 device on the front ports?