Computer Hope
Hardware => Hardware => Topic started by: KennMobelhaus on September 26, 2008, 10:38:36 PM
-
INtel 1.7ghz
MOBO: Asrock p4vm800
BIOS: AMI v02.57
CD-MASTER 48E SC-148 CD-ROM drive
256 ram
HDD Seagate barracuda 40gb (but this was corrupted)
now i want to install new OS windows xp sp2.....
Set cd/dvd as primary in the bios...
connection: 1st IDE cable to HDD master
2nd IDE cable to CD-ROM Drive
license Windows XP sp2 bootable CD already inserted...
But it won't run.... monitor dead....... no response....
LED indicator in the PC is green... CD-ROM flashes the green LED.....
can U help me??? maybe i forgot something just ask me....
-
Set cd/dvd as primary in the bios...
By this, do you mean that you made the optical drive the first device in the boot order?
-
Yes...
There are 3 choices there..
1. floppy
2. HDD
3. CD/dvd
so i configured it
1. cd/dvd
2. hdd
3. floppy
Still no output in the monitor..
what do u think???
-
Is there an LED on the monitor? Does in show green or amber?
Is the data cable of the monitor attached to the correct connection on the motherboard?
Is it on-board (built-in) video, or running from an installed video card?
-
Is there an LED on the monitor? Does in show green or amber?
ans: Blue.. or it means its ok.... then amber again then blue again..
Is the data cable of the monitor attached to the correct connection on the motherboard?
ans: Yes, connected exactly and correctly..
Is it on-board (built-in) video, or running from an installed video card?
ans: Yes, connected in On-Board(built-in) video
-
Please access the AMI BIOS and see if you can find the settings for on-board video support to see if it is enabled. (This assumes you have another monitor available.)
-
Does this CD have shiny holograms all over it and say Microsoft ? ?
I'm afraid we're dealing with a copy here...
-
Hi... long time... I just want to tell the good news... Its only the PSU..... I bought new one and now its ok... thanks a lot for time guys.....