Welcome guest. Before posting on our computer help forum, you must register. Click here it's easy and free.

Author Topic: Drive A Error system halt  (Read 17952 times)

0 Members and 1 Guest are viewing this topic.

crotchetybob

    Topic Starter


    Greenhorn

    • Experience: Beginner
    • OS: Unknown
    Drive A Error system halt
    « on: May 13, 2012, 03:20:56 PM »
    Hi guys and gals!  I've spent the better part of the day perusing this site searching for a solution to what seems to be becoming a convoluted problem.

    Everything was going fine, gonna do a system restore, press F11, right? Get to the restore page just fine, but the mouse wasnt plugged in, so had to shut down and find my mouse for this disused 3 year old desktop.  Plug the mouse in, suddenly, I get the 1 long 2 short beep notifying me that I have a problem with my GPU or my RAM.  I went through the ram first, swapping each one out in turn, only to get the same error beeps.  I tried one RAM stick at a time, resulting in the same error beeps.  So, it must be my GPU, right?  Well, as it turns out, my GPU is integrated in my motherboard (MS-7548).  So, I figure if I can snag a new graphics card on the cheap, I can not only upgrade my system, but I can avoid having to shell out for a new motherboard.  Now, I dont get the error beeps, but it tries to boot from CD-rom, followed by Drive A (not installed) followed by a system halt error.  If I try to start it up with the new GPU driver disc, I get a "Insert system disc"error.

    Now, at no point am I given the option to enter BIOS to remove drive A from the boot order.  Ive held down delete as my system boots, and nothing. Im really quite lost here.  Ive tried re-seating everything, including my CPU.  Ive thoroughly dusted the entire thing.  What do I do next?

    Allan

    • Moderator

    • Mastermind
    • Thanked: 1260
    • Experience: Guru
    • OS: Windows 10
    Re: Drive A Error system halt
    « Reply #1 on: May 13, 2012, 03:23:52 PM »
    I suggest you start by replacing the battery on the motherboard. Then try to enter bios and change the boot device order (note: DELETE may not be the correct key to enter your bios - watch the screen at boot to see which key(s) to depress to enter setup / bios).

    crotchetybob

      Topic Starter


      Greenhorn

      • Experience: Beginner
      • OS: Unknown
      Re: Drive A Error system halt
      « Reply #2 on: May 13, 2012, 03:24:34 PM »
      Ah, failed to mention I've already replaced the battery.  Good suggestion, though.

      Salmon Trout

      • Guest
      Re: Drive A Error system halt
      « Reply #3 on: May 13, 2012, 03:35:25 PM »
      DELETE may not be the correct key to enter your bios

      F10 everywhere I've looked.

      crotchetybob

        Topic Starter


        Greenhorn

        • Experience: Beginner
        • OS: Unknown
        Re: Drive A Error system halt
        « Reply #4 on: May 13, 2012, 03:41:04 PM »
        Before I am given the opportunity to enter BIOS, my screen reads as follows:

        Award BootBlock BIOS V1.0
        Copyright (c) 2000, Award software, Inc

        Bios ROM checksum error

        Detecting IDE ATAPI device

        Detecting IDE ATAPI device
             Found CDROM, try to boot from it ... FAIL

        Detecting floppy drive A media
        Drive A error. System Halt.

        ...followed by a long series of rapid short beeps.  I'm not given the chance to press f1 or f10 or DEL or anything before I go to this screen.  If I remove the new GPU, and try to boot without it, I'm given the GPU error code of 1 long and 2 short beeps, again.  Could it simply be my motherboard is wrecked?

        Geek-9pm


          Mastermind
        • Geek After Dark
        • Thanked: 1026
          • Gekk9pm bnlog
        • Certifications: List
        • Computer: Specs
        • Experience: Expert
        • OS: Windows 10
        Re: Drive A Error system halt
        « Reply #5 on: May 13, 2012, 03:55:51 PM »
        Quote
        Bios ROM checksum error
        You may be at the end of the rope.
        CMOS  checksum can be corrected. Not ROM
        Could you please give the model number of the PC or motherboard.

        Why don't you have a floppy?

        crotchetybob

          Topic Starter


          Greenhorn

          • Experience: Beginner
          • OS: Unknown
          Re: Drive A Error system halt
          « Reply #6 on: May 13, 2012, 03:58:47 PM »
          MS-7548 motherboard.  I have an HP Pavilion a6750f PC.

          The floppy seems to have disappeared over the course of the last 3 years and 4 moves.

          Allan

          • Moderator

          • Mastermind
          • Thanked: 1260
          • Experience: Guru
          • OS: Windows 10
          Re: Drive A Error system halt
          « Reply #7 on: May 13, 2012, 04:05:25 PM »

          crotchetybob

            Topic Starter


            Greenhorn

            • Experience: Beginner
            • OS: Unknown
            Re: Drive A Error system halt
            « Reply #8 on: May 13, 2012, 04:09:31 PM »
            What has me truly perplexed is why I was able to reach the system restore screen not 5 hours ago, but when I realized my mouse wasnt plugged in, I shut down and now I get these resultant errors, starting with the 1 long 2 short, and ending where I stand now.

            crotchetybob

              Topic Starter


              Greenhorn

              • Experience: Beginner
              • OS: Unknown
              Re: Drive A Error system halt
              « Reply #9 on: May 13, 2012, 04:10:52 PM »
              Also, to reiterate, I am not given the chance to enter BIOS. It goes straight to the aforementioned screen.

              Computer_Commando



                Hacker
              • Thanked: 494
              • Certifications: List
              • Computer: Specs
              • Experience: Expert
              • OS: Windows 10
              Re: Drive A Error system halt
              « Reply #10 on: May 13, 2012, 04:48:50 PM »
              MS-7548 motherboard.  I have an HP Pavilion a6750f PC.

              The floppy seems to have disappeared over the course of the last 3 years and 4 moves.
              Could be the FDD cable has come loose.

              Also, to reiterate, I am not given the chance to enter BIOS. It goes straight to the aforementioned screen.
              You have to force it to the BIOS by repeatedly tapping the appropriate key.  Holding the key down does nothing.

              patio

              • Moderator


              • Genius
              • Maud' Dib
              • Thanked: 1769
                • Yes
              • Experience: Beginner
              • OS: Windows 7
              Re: Drive A Error system halt
              « Reply #11 on: May 13, 2012, 04:54:28 PM »
              Because it's intermittent you may have a flakey PSU...if you've changed out the BIOS battery...
              However i've gotten new batteries off the shelf dead as a doornail so that may be something to consider...
              " Anyone who goes to a psychiatrist should have his head examined. "

              Geek-9pm


                Mastermind
              • Geek After Dark
              • Thanked: 1026
                • Gekk9pm bnlog
              • Certifications: List
              • Computer: Specs
              • Experience: Expert
              • OS: Windows 10
              Re: Drive A Error system halt
              « Reply #12 on: May 13, 2012, 05:02:45 PM »
              Quote
              Bios ROM checksum error
              Is that true? It matters.

              crotchetybob

                Topic Starter


                Greenhorn

                • Experience: Beginner
                • OS: Unknown
                Re: Drive A Error system halt
                « Reply #13 on: May 13, 2012, 05:07:18 PM »
                I'm uncertain what a biosrom checksum error is, so i cannot confirm the truthiness of this message.  I will try a different battery, as 2 came in the pack.  Tried pulling out the PSU plug and popping it back in, to no avail. 

                EDIT-Different battery made no difference.  Googled checksum error, seems the general consensus is replace the motherboard.  Was hoping to avoid this, but if it's all I can do, then it must be done.

                EDIT 2-No FDD installed on my machine.  Not sure if a cable for a nonexistent device can become loose?  Not to sound like a sarcastic *censored*, but generally I follow the cables from various devices, being a PC idiot, and don't know where to begin on the motherboard to check for this.

                EDIT 3-Any way I can check the validity of my PSU?  It seems to be in working order.  The new GPU fan spins up just fine, all other cooling units are in working condition, and all LEDs and disc drives seem to be operable.
                « Last Edit: May 13, 2012, 05:20:09 PM by crotchetybob »

                Geek-9pm


                  Mastermind
                • Geek After Dark
                • Thanked: 1026
                  • Gekk9pm bnlog
                • Certifications: List
                • Computer: Specs
                • Experience: Expert
                • OS: Windows 10
                Re: Drive A Error system halt
                « Reply #14 on: May 13, 2012, 05:33:55 PM »
                If fans and drives are running, the PSU is likely OK.

                Repairing a failed BIOS ROM is not cost-effective for most computers. The ROM is soldered to the board. Consult the motherboard documentation  to see if it is  a Flash  PROM, not a literal ROM.

                There is a procedure for repairing a Flash BIOS on a few motherboards.