SM Bus controler

[garfield]

Hi, I don't know if I'm in the right place for this question but I'll ask anyway. My SM Bus controler has no drivers installed I don't have a disk for the drivers. I read that my bus cotroler isn't working because I haven't installed the chipset drivers. Do chipset drivers have anything to do with your Bios? If I upgrade my bios will this fix the driver problem?

[GX1_Man]

BIOS has absolutely nothing to do with this.

What is the computer or motherboard make/model?

If you don't know, download Everest and find out.

http://www.majorgeeks.com/download4181.html

If you have a modem, please list the make and model of that as well. If you post the whole Everest report, that is even better.

[garfield]

Thanks for the tip! Downladed and scanned. Operating system windows XP Home 2002,Motherboard is manufactured by ASUSTeK Computer INC Motherboard ID   08/30/2002-nForce-A7N266VM  
Motherboard Name   Asus A7N266-VM (3 PCI, 1 AGP, 2 DIMM, Audio, Video)  Chipset Properties:  
Motherboard Chipset   nVIDIA nForce 220 (DDR)  
Memory Timings   2.5-3-3-6 (CL-RCD-RP-RAS)
 I have disabled my graphics card because it keeps getting stuck in a loop and the screen reselution sets at 4bit. I think its damadged
[ North Bridge: nVIDIA nForce 220 (DDR) (Crush11) ]  
    North Bridge Properties:  
   North Bridge   nVIDIA nForce 220 (DDR) (Crush11)  
   Revision   B2  
   In-Order Queue Depth   8  
  
  Memory Timings:  
   CAS Latency (CL)   2.5T  
   RAS To CAS Delay (tRCD)   3T  
   RAS Precharge (tRP)   3T  
   RAS Active Time (tRAS)   6T  
   Row Cycle Time (tRC)   9T  
   Row Refresh Cycle Time (tRFC)   10T  
   RAS To RAS Delay (tRRD)   2T  
   Read To Read Delay (tRTR)   3T  
   Read To Write Delay (tRTW)   4T  
   Write To Read Delay (tWTR)   3T  
  
  Error Correction:  
   ECC   Not Supported  
   ChipKill ECC   Not Supported  
   RAID   Not Supported  
   ECC Scrubbing   Not Supported  
  
  Memory Slots:  
   DRAM Slot #1   256 MB (DDR SDRAM)  
  
  AGP Controller:  
   AGP Version   2.00  
   AGP Status   Disabled  
   AGP Aperture Size   64 MB  
   Supported AGP Speeds   1x, 2x, 4x  
   Current AGP Speed   1x  
   Fast-Write   Supported, Disabled  
   Side Band Addressing   Supported, Disabled  
  
  Chipset Manufacturer:  
   Company Name   NVIDIA Corporation  
   Product Information   http://www.nvidia.com/page/mobo.html  
   Driver Download   http://www.nvidia.com/content/drivers/drivers.asp  
  
  Problems & Suggestions:  
   Problem   AGP is disabled. This may cause performance penalty.  
   Problem   Current AGP speed is lower than maximum supported. This may cause performance penalty.  
My modem is a Lucent Win Modem Dial up connection. from this info I should be able to get the drivers I need thank-you very much!

[GX1_Man]

Glad you are well on your way. Post back if further problems. Lucent has generic modem driver at their site.