The motor has an external rotor; the stator windings are copper-colored. The
spindle bearing is in the center. To the left of center is the actuator with a read-write head under the tip of its very end (near center); the orange stripe along the side of the arm, a thin printed-circuit cable, connects the read-write head to the hub of the actuator. The flexible, somewhat 'U'-shaped, ribbon cable barely visible below and to the left of the actuator arm is the flexible section, one end on the hub, that continues the connection from the head to the controller board on the opposite side.
http://en.wikipedia.org/wiki/Hard_disk