Welcome guest. Before posting on our computer help forum, you must register. Click here it's easy and free.

« previous next »
Pages: [1] 2  All   Go Down

Author Topic: Router Wondering Still  (Read 6238 times)

0 Members and 1 Guest are viewing this topic.

squall_01

    Topic Starter


    Prodigy

    Thanked: 80
    Router Wondering Still
    « on: August 18, 2009, 05:00:55 AM »
    I have a linksys router ver 2, there wasnt a manual an I didnt see an adress number on the manual I got from there site.  Is there any way too tell to config it?
    Logged
    Windows 7 RC Tester.  Working on it.  Your monitor says etchasketch on the side!

    If I fall who is there to pick me up now.  I stand alone but I stand as the gaurdian for whom I wish to protect.  The sound of my blade utters my name as you fall.  For I shall not move.  For those that forsake the very people are wosres

    Carbon Dudeoxide

    • Global Moderator

      • Mastermind
      • Thanked: 169
      • Yes
      • Yes
      • Yes
    • Certifications: List
    • Experience: Guru
    • OS: Mac OS
    Re: Router Wondering Still
    « Reply #1 on: August 18, 2009, 06:23:31 AM »
    Go to Command Prompt, type ipconfig and press Enter.

    Look for IP Address . . . . . . . : 192.168.xx.xx

    For example, mine is 192.168.2.5

    To access your router, type in 192.168.2.1 in your Internet Browser.
    Logged

    squall_01

      Topic Starter


      Prodigy

      Thanked: 80
      Re: Router Wondering Still
      « Reply #2 on: August 18, 2009, 06:43:00 AM »
      ah, well I pucnched in a few but I'll try that.  The fact that I have dial up shouldnt effect it should it?
      Logged
      Windows 7 RC Tester.  Working on it.  Your monitor says etchasketch on the side!

      If I fall who is there to pick me up now.  I stand alone but I stand as the gaurdian for whom I wish to protect.  The sound of my blade utters my name as you fall.  For I shall not move.  For those that forsake the very people are wosres

      Carbon Dudeoxide

      • Global Moderator

        • Mastermind
        • Thanked: 169
        • Yes
        • Yes
        • Yes
      • Certifications: List
      • Experience: Guru
      • OS: Mac OS
      Re: Router Wondering Still
      « Reply #3 on: August 18, 2009, 06:51:14 AM »
      Nope.
      Logged

      squall_01

        Topic Starter


        Prodigy

        Thanked: 80
        Re: Router Wondering Still
        « Reply #4 on: August 18, 2009, 07:43:55 AM »
        okay, cause I was getting that when I put them in.  Dont it have to be http:// then the number?  Sorry, new to this concept. :-\
        Logged
        Windows 7 RC Tester.  Working on it.  Your monitor says etchasketch on the side!

        If I fall who is there to pick me up now.  I stand alone but I stand as the gaurdian for whom I wish to protect.  The sound of my blade utters my name as you fall.  For I shall not move.  For those that forsake the very people are wosres

        Carbon Dudeoxide

        • Global Moderator

          • Mastermind
          • Thanked: 169
          • Yes
          • Yes
          • Yes
        • Certifications: List
        • Experience: Guru
        • OS: Mac OS
        Re: Router Wondering Still
        « Reply #5 on: August 18, 2009, 07:47:25 AM »
        Show me the results of IPCONFIG. Just post the entire command prompt window here.
        Logged

        squall_01

          Topic Starter


          Prodigy

          Thanked: 80
          Re: Router Wondering Still
          « Reply #6 on: August 18, 2009, 08:57:24 AM »
          I will later, storm is coming in an what not.
          Logged
          Windows 7 RC Tester.  Working on it.  Your monitor says etchasketch on the side!

          If I fall who is there to pick me up now.  I stand alone but I stand as the gaurdian for whom I wish to protect.  The sound of my blade utters my name as you fall.  For I shall not move.  For those that forsake the very people are wosres

          Carbon Dudeoxide

          • Global Moderator

            • Mastermind
            • Thanked: 169
            • Yes
            • Yes
            • Yes
          • Certifications: List
          • Experience: Guru
          • OS: Mac OS
          Re: Router Wondering Still
          « Reply #7 on: August 18, 2009, 09:03:38 AM »
          Why not just do it now so I can quickly help you. It will only take 2 seconds.
          Logged

          squall_01

            Topic Starter


            Prodigy

            Thanked: 80
            Re: Router Wondering Still
            « Reply #8 on: August 18, 2009, 04:21:34 PM »
            Quote from: Carbon Dudeoxide on August 18, 2009, 06:23:31 AM
            Go to Command Prompt, type ipconfig and press Enter.

            Look for IP Address . . . . . . . : 192.168.xx.xx

            For example, mine is 192.168.2.5

            To access your router, type in 192.168.2.1 in your Internet Browser.

            Its given me a cant display page an wants too connect  :o ::) :-\ :(
            Logged
            Windows 7 RC Tester.  Working on it.  Your monitor says etchasketch on the side!

            If I fall who is there to pick me up now.  I stand alone but I stand as the gaurdian for whom I wish to protect.  The sound of my blade utters my name as you fall.  For I shall not move.  For those that forsake the very people are wosres

            Carbon Dudeoxide

            • Global Moderator

              • Mastermind
              • Thanked: 169
              • Yes
              • Yes
              • Yes
            • Certifications: List
            • Experience: Guru
            • OS: Mac OS
            Re: Router Wondering Still
            « Reply #9 on: August 18, 2009, 07:43:00 PM »
            Quote from: Carbon Dudeoxide on August 18, 2009, 07:47:25 AM
            Show me the results of IPCONFIG. Just post the entire command prompt window here.
            Logged

            BC_Programmer


              Mastermind
            • Typing is no substitute for thinking.
              • Thanked: 1140
              • Yes
              • Yes
              • BC-Programming.com
            • Certifications: List
            • Computer: Specs
            • Experience: Beginner
            • OS: Windows 11
            Re: Router Wondering Still
            « Reply #10 on: August 19, 2009, 01:26:10 AM »
            Squall, use the result from IPCONFIG, not "IP address" but rather "Default gateway"

            as an example for me to access my router config I navigate to http://192.168.0.1
            Logged
            I was trying to dereference Null Pointers before it was cool.

            Carbon Dudeoxide

            • Global Moderator

              • Mastermind
              • Thanked: 169
              • Yes
              • Yes
              • Yes
            • Certifications: List
            • Experience: Guru
            • OS: Mac OS
            Re: Router Wondering Still
            « Reply #11 on: August 19, 2009, 02:08:26 AM »
            Quote from: BC_Programmer on August 19, 2009, 01:26:10 AM
            Squall, use the result from IPCONFIG, not "IP address" but rather "Default gateway"

            as an example for me to access my router config I navigate to http://192.168.0.1


            LOL I can't believe I didn't see that.

            My Default Gateway is 192.168.2.1 - which is the address I put into my Internet Browser to access my Router. Okay Squall?
            Logged

            squall_01

              Topic Starter


              Prodigy

              Thanked: 80
              Re: Router Wondering Still
              « Reply #12 on: August 19, 2009, 06:00:33 AM »
              Thats what I was doing. would that then show the IP for that machine  ???
              Logged
              Windows 7 RC Tester.  Working on it.  Your monitor says etchasketch on the side!

              If I fall who is there to pick me up now.  I stand alone but I stand as the gaurdian for whom I wish to protect.  The sound of my blade utters my name as you fall.  For I shall not move.  For those that forsake the very people are wosres

              Carbon Dudeoxide

              • Global Moderator

                • Mastermind
                • Thanked: 169
                • Yes
                • Yes
                • Yes
              • Certifications: List
              • Experience: Guru
              • OS: Mac OS
              Re: Router Wondering Still
              « Reply #13 on: August 19, 2009, 06:23:34 AM »
              What?


              Quote from: Carbon Dudeoxide on August 18, 2009, 07:43:00 PM
              Quote from: Carbon Dudeoxide on August 18, 2009, 07:47:25 AM
              Show me the results of IPCONFIG. Just post the entire command prompt window here.
              Logged

              kpac

              • Web moderator


                • Hacker

              • kpac®
                • Thanked: 184
                • Yes
                • Yes
                • Yes
              • Certifications: List
              • Computer: Specs
              • Experience: Expert
              • OS: Windows 7
              Re: Router Wondering Still
              « Reply #14 on: August 19, 2009, 08:18:33 AM »
              Logged
              Pages: [1] 2  All   Go Up
              « previous next »