Conner CP30104H specifications
Updated: 06/30/2020 by Computer Hope
Jumper settings
| SINGLE DRIVE | PRIMARY DRIVE | SECONDARY DRIVE |
|---|---|---|
| C AND D JUMPED | C AND D JUMPED | C AND D NOT JUMPED |
Tip
DSP is an acronym for drive secondary present. When configuring the drive jumpers on a computer with dual hard drives, the DSP jumper setting should be used.
CMOS settings
| MODEL (CFS SERIES) | SIZE | CYL | HDS | SECT | WPCOMP | LZONE | Type |
|---|---|---|---|---|---|---|---|
| CP30104H | 120 MB | 762 | 8 | 39 | 0 | 762 | IDE |
Hard drive specifications
| Formatted capacity (MB=1,000,000): | 121.7 |
| Cylinders: | 1524 |
| Sectors: | 39 |
| Heads: | 4 |
| Disks: | 2 |
| Buffer size: | 32 KB, segmented, adaptive |
| Average seek: | 19ms |
| Single track: | 8ms |
| Rotation speed / Avg. latency: | 3399 rpm / 8.8ms |
| Transfer rate to/from media: | 1.5 MB/sec |
| Transfer rate to/from buffer: | 4.5 MB/sec |
| TPI (tracks per inch): | 1850 |
| BPI (KBits Per Inch) | 33,184 |
| Size: | 1.0" Height x 4.0" Wide x 5.75" Depth |
| Weight: | 1.3 lbs |
Power requirements
| +12 Volts | +5 Volts | Power | |
| Read/write | 200 ma | 280 ma | 3.8 W |
| Seek | 260 ma | 150 ma | 3.9 W |
| Idle | 175 ma | 150 ma | 2.8 W |
| Standby | N/A | N/A | N/A |
| Sleep | N/A | N/A | N/A |
| Spin up (7 seconds) | 1100 ma | 380 ma | N/A |