Conner CFA540S specifications
Updated: 06/30/2020 by Computer Hope
Jumper settings
| SCSI_ID | ID1 | ID2 | ID3 |
|---|---|---|---|
| 0 | Out | Out | Out |
| 1 | In | Out | Out |
| 2 | Out | In | Out |
| 3 | In | In | Out |
| 4 | Out | Out | In |
| 5 | In | Out | In |
| 6 | Out | In | In |
| 7 | In | In | In |
CMOS settings
| MODEL (CFS SERIES) | SIZE | CYL | HDS | SECT | WPCOMP | LZONE | Type |
|---|---|---|---|---|---|---|---|
| CFA540S | 540 MB | N/A | N/A | N/A | N/A | N/A | SCSI |
Hard drive specifications
| Formatted capacity (MB=1,000,000): | 540 MB |
| Cylinders: | |
| Sectors: | |
| Heads: | |
| Disks: | |
| Buffer size: | |
| Average seek: | 10.5 ms |
| Single track: | 3 ms |
| Rotation speed / Avg. latency: | 4500 rpm / 6.66 ms |
| Transfer rate to/from media: | 27-46 MB/sec |
| Transfer rate to/from buffer: | 5 MB/sec |
| TPI (tracks per inch): | 3258 |
| BPI (bits per inch): | 62,500 |
| Size: | 1.0" High x 4.0" Wide x 5.75" Depth |
| Weight: | 1.3 lbs. |
Power requirements
| +12 Volts | +5 Volts | Power | |
| Read/write | 170 ma | 620 ma | 5.1 W |
| Seek | 380 ma | 360 ma | 6.2 W |
| Idle | 190 ma | 340 ma | 3.8 W |
| Standby | 30 ma | 195 ma | 0.9 W |
| Sleep | N/A | N/A | N/A |
| Spin up (7 seconds) | 1.2 amp | 550 ma | N/A |