Welcome guest. Before posting on our computer help forum, you must register. Click here it's easy and free.

Author Topic: Intel Core i7 930 running hot or not?  (Read 32370 times)

0 Members and 1 Guest are viewing this topic.

patio

  • Moderator


  • Genius
  • Maud' Dib
  • Thanked: 1769
    • Yes
  • Experience: Beginner
  • OS: Windows 7
Re: Intel Core i7 930 running hot or not?
« Reply #15 on: September 16, 2010, 05:53:01 PM »
Yes, overclocking your processor draws more power and make it run hotter. If you do extreme overclocking it is recommended to use liquid cooling or something similar. Also being i7 Core, they are well known to run quite hot compared to other processors (this is normal). In your case, it should be fine.

Make sure the heatsink is clamped down correctly and firmly (a bad mount can increase temperature a lot). Check the max temperture when doing a stress test or playing some game with high system demands. If that's going over 80 C then you might want to think about cooling. Also note that there are four core temperatures, not just one.

Do you have any neon lights (extras), a lot of components (hard drives, etc), high powered graphic card(s) / SLI, or a mess of cables in the computer case? Whats the size of case? Amount of intake / out take fans?

When in a hole it's best to stop digging.
This is not the 1st time you have posted erroneous information...and someone is gonna wind up damaging components.

Do more research next time before hitting the Post button.

patio.
" Anyone who goes to a psychiatrist should have his head examined. "

Azzaboi



    Apprentice
  • Aaron's Game Zone
  • Thanked: 37
    • Aaron's Game Zone
  • Experience: Experienced
  • OS: Windows 7
Re: Intel Core i7 930 running hot or not?
« Reply #16 on: September 16, 2010, 09:34:10 PM »
patio - please point out any errors or why would saying that damage any components?  ???

Even killerb255 suggestion of temperatures sounds about right for i7 Core (40 C to 60 C). Now since the post owner has a factory overclocked version to 4Ghz (you assume the company knows what they are doing), you can expect it to draw more power and run hotter (around 50 C to 70 C). Suggesting to keep an eye on it, check for safety and if it goes over 80 C, then stop. Doesn't seem like bad advice? No where did i say to overclock it more or something stupid like that, that's the only way it would of cause damage.

Ways to reduce the temperature would be checking the other components (make sure nothing else is heating up or blocking) and ensure airflow, possible updating the BIOS if the latest version has better motherboard fan management, ensure the CPU heatsink is on correctly (if this is the case then you would have issues if not fixed), lower the clocks or voltage to CPU (drops performance a bit), disable Hyper Threading (suicude for performance), or getting a cooling system.

If it was me, I would check then leave it (unless tweaking) and keep an eye on it's peak temperatures (which could lower life span) and not worry so much about idle (i7 core normally runs hot, but sure reduce it if you can), idle temperature can also be affected by room temperature, how long it's been running, a small sized computer case, etc.
« Last Edit: September 16, 2010, 10:10:10 PM by Azzaboi »
Aaron's Game Zone
The best free online flash games: http://azzaboi.weebly.com

Play Games - Play free games at Play Games Arcade

patio

  • Moderator


  • Genius
  • Maud' Dib
  • Thanked: 1769
    • Yes
  • Experience: Beginner
  • OS: Windows 7
Re: Intel Core i7 930 running hot or not?
« Reply #17 on: September 17, 2010, 04:27:54 AM »
100C from your initial Post is a BIG difference from 40-60C..... ::)
" Anyone who goes to a psychiatrist should have his head examined. "

BC_Programmer


    Mastermind
  • Typing is no substitute for thinking.
  • Thanked: 1140
    • Yes
    • Yes
    • BC-Programming.com
  • Certifications: List
  • Computer: Specs
  • Experience: Beginner
  • OS: Windows 11
Re: Intel Core i7 930 running hot or not?
« Reply #18 on: September 17, 2010, 06:41:01 AM »
100C from your initial Post is a BIG difference from 40-60C..... ::)

But weren't you listening? the i7 IS INVINCIBLE to heat because it has SPECIAL COOLING FEATURES!
I was trying to dereference Null Pointers before it was cool.

Big



    Beginner

    Thanked: 4
    • Experience: Experienced
    • OS: Windows XP
    Re: Intel Core i7 930 running hot or not?
    « Reply #19 on: September 17, 2010, 08:09:40 AM »
    For those who don't know: a CPU can run up to 130°C, at that temp, the CPU auto-shuts down itself out of protection. Theoretically it could go higher. Good thing there is a protection system, much like when you drop a hdd (a modern one), there is a system that senses a change in G-force (Newton) and the needle of the hdd automatically lifts itself up from the disk stack and moves away, to not scratch the disk.
    Computerhope is corrupt.

    Azzaboi



      Apprentice
    • Aaron's Game Zone
    • Thanked: 37
      • Aaron's Game Zone
    • Experience: Experienced
    • OS: Windows 7
    Re: Intel Core i7 930 running hot or not?
    « Reply #20 on: September 17, 2010, 10:21:43 AM »
    Quote
    100C from your initial Post is a BIG difference from 40-60C

    Yes, I said it could go up to 100C then has a feature which kicks in to slow it down in an attempt to let it cool off. The i7 Core is a very hard chip to fry unless you do something crazy! Then I went to say I don't recommend you have it continously running at a temperature like that because it could lower life span and in the long run, the cooler you run your CPU, the better.

    Saying:
    Quote
    Recommended Temperatures (you can give or take 10 C - up to 20 C)
    Idle Temp: 40 C
    Max Temp: 80 C

    Let's say an average i7 Core is around 40-60C for 2.8GHz+, the more speed the hotter it will get. The processor used is a 4GHz (factory overclocked from 2.8GHz), which is probably why the idle would be around 50C, it has still been tested as 100% stable. Yes it would be overall hotter (50-70C?) however the CPU cooler will kick in at maximum load or when it's getting too hot. It's unlikely to go far over 80C, if it does and reachs up to 100C it will be kicked back to 80-90C anyway by the CPU and motherboard management. You don't want to get to that point because it temperary lowers the performance, so mark around 80C as a limit to check if you want to care for your baby.

    Quote
    But weren't you listening? the i7 IS INVINCIBLE to heat because it has SPECIAL COOLING FEATURES!

    If you meant that to be sarcastic, it is actually somewhat a truthful comment. I wouldn't say INVINCIBLE however, the only way I know to fry an i7 Core Chipset would be from danagerously high voltage or spiking, not the temperature. What Big just said makes sense. The i7 Core is known to be safely overclocked by up to 40% and run at high temperatures and it couldn't care less!

    The life span reduces at extreme temperatures mainly due from going cold to hot and back again as it expands/contracts the motherboard and parts (the same deal as switch on and off the computer, newer technology also has protection against this). The motherboard or other components would fry before any damage to the CPU and the motherboard auto-shuts off before it reachs that high temperature, but i mentioned to check the other components nearby. If there was a wire sitting on the heatsink or something like that it could melt through, if the cpu is peaking/spiking there might be a risk, or if the airflow is being trapped inside the case then it could possible heat the other components causing damage. Otherwise it's a pretty safe bet it will be happy to run.

    I enjoy extreme tweaking and overclocking. I will be honest in saying I've never overclocked an i7 Core, I think it's got enough power already, but if a factory was to do it they would of tested it to ensure it's well below the safety line. I've read overclocking guides, including those for i7. It is great to take an interest in cooling for your computer, but also to understand the limits and safety. Also recommended temperature limits would be different per cpu, voltage and their clock speed, the work area they are in and the other components around them. The graphic card used would also increase the overall temperature, etc.
    « Last Edit: September 17, 2010, 10:58:01 AM by Azzaboi »
    Aaron's Game Zone
    The best free online flash games: http://azzaboi.weebly.com

    Play Games - Play free games at Play Games Arcade

    BC_Programmer


      Mastermind
    • Typing is no substitute for thinking.
    • Thanked: 1140
      • Yes
      • Yes
      • BC-Programming.com
    • Certifications: List
    • Computer: Specs
    • Experience: Beginner
    • OS: Windows 11
    Re: Intel Core i7 930 running hot or not?
    « Reply #21 on: September 17, 2010, 01:28:49 PM »
    For those who don't know: a CPU can run up to 130°C, at that temp, the CPU auto-shuts down itself out of protection. Theoretically it could go higher. Good thing there is a protection system,

    Both of those facts are complete and utter nonsense.

    A CPU is going to get shut down by the motherboard long before it comes even CLOSE to approaching those temperatures.

    Additionally, the CPU doesn't shut itself off. The motherboard does. The best the CPU can do on it's own is go into a permanent reboot loop. The motherboard is in control of actually cutting the power if it needs to (which is what it does when the temp reaches the value specified in the CMOS setup).

    Quote
    much like when you drop a hdd (a modern one), there is a system that senses a change in G-force (Newton) and the needle of the hdd automatically lifts itself up from the disk stack and moves away, to not scratch the disk.
    They are called heads, not "needles". we aren't talking about miniature vinyl records here. Second, when a hard drive is off, the heads are parked away from the platters either via a spring that takes over when the voice coil actuator is powered down, or as a "last command" send to said voice coil when the logic board stops receiving power (there is usually just enough power for it to get the head into the landing zone.) For the most part a hard drive can take a bit more abuse when it's off then when it's on.

    of course, hard drives are more susceptible to shock when they are operating, being that their needl... ahem read/write heads are actually floating over the disk surface. But Hard Drives, in general, do not have accelerometers. Some high-end laptops and other portable devices do, but that's not part of their hard drives.

    The life span reduces at extreme temperatures mainly due from going cold to hot and back again as it expands/contracts the motherboard and parts (the same deal as switch on and off the computer, newer technology also has protection against this).
    Ahh, I know what your talking about, the magical "change the laws of physics so metal and earth elements no longer contract and expand at a different speed" device. Amazing what they can do with technology, what with the ability to magically change the set laws of this universe.


    Quote
    The motherboard or other components would fry before any damage to the CPU and the motherboard auto-shuts off before it reachs that high temperature,
    Motherboard temp doesn't always correspond with CPU temp. CPU temp is always higher then motherboard temp. The motherboard would almost always shut it off before it reaches that temp, which is good, because the CPU is incapable of actually shutting down the system on it's own.

    Quote
    but i mentioned to check the other components nearby.

    and check nearby desks as well! There might be an accelerometer!

    Quote
    If there was a wire sitting on the heatsink or something like that it could melt through, if the cpu is peaking/spiking there might be a risk, or if the airflow is being trapped inside the case then it could possible heat the other components causing damage. Otherwise it's a pretty safe bet it will be happy to run.
    SD rating: -5 stupid.

    Quote
    I enjoy extreme tweaking

    DRUGS ARE BAD!


    Quote
    and overclocking.

    Oh, disregard above.


    Quote
    but if a factory was to do it they would of tested it to ensure it's well below the safety line.
    gotta love those overclocking factories. He said "Computer firm"  not manufacturer. Difference.




    OK, this has all been fun.

    But for the love of your preferred diety, where are you pulling these figures from?

    you say "it runs fine at 100c" and Big makes up some 130 degree figure that he probably pulled out the wazoo (or saw on a site where the author pulled it out theirs).

    NONE of what you said is even CLOSE to anything said by INTEL in their specification documents.

    First, let's take a look at some of the maximum temperatures, shall we:
    Quote
    1. Intel® Core™ i7 Processor Extreme Edition Series and Intel® Core™ i7 Processor
    Intel ® Core™i7-965 , i7-940, i7-920 Processors
    Range: 43.2 degree Celsius (Power - 0W) to 67.9 degree Celsius (Power 130W)
    Source:http://download.intel.com/design/processor/datashts/320834.pdf Page : 79 Table: 6-2

    2.Intel® Core™ i7-900 Desktop Processor Extreme Edition Series and Intel® Core™ i7-900 Desktop Processor Series on 32-nm Process
    Range: 43.2 degree Celsius (Power - 0W) to 67.9 degree Celsius (Power 130W)
    Source:http://download.intel.com/design/processor/datashts/323252.pdf
    Sources:
    http://www.intel.com/design/corei7/documentation.htm


    43.2 degrees on standby, and 67.9 degrees on full power. This answers the original posters question, "is my CPU running too hot" Clearly their temp falls under that amount.

    However, nowhere does it say in any of their documentation that "oh hey, if it goes to 130 degrees it will like magically shut off. Also we implemented technology to change the laws of physics so that metal doesn't expand and contract as much, despite that actually having nothing really to do with how heat damages processors. (I will get to that in a moment).

    Now, let's remember the above temperatures as we read this passage, straight from the Intel Docs:

    Quote

    The processor requires a thermal solution to maintain temperatures within its operating
    limits. Any attempt to operate the processor outside these operating limits may result
    in permanent damage to the processor and potentially other components within the
    system. Maintaining the proper thermal environment is key to reliable, long-term
    system operation.


    Now, the "operating limits" are not some mystical fairy tale three digit values you made up or read in some "i7 tweak guide", it's referring to the limits described earlier-43.2 to 67.9 degrees. the operating specifications.

    Now, let's return to the fact that damage to a processor is not caused by expansion and contraction of the metal.


    In the standard design of a processor, Electrons in one transistor are not supposed to be able to reach other transistors during normal operation. However, according to the principle of quantum tunnelling, which I'm sure your i7 tweak guides DON'T cover, it's possible for a electron to escape from an infinitely deep energy well. Usually, that doesn't happen very often. As I'm sure you are aware, being a extreme gamer and all, a transistor is comprised of positively and negatively doped silicon (doped with metals, this becoming a semi-conductor) surrounding un-doped silicon (which is an insulator). Every now and then, through chance alone (ahh yes, quantum probability, proving that despite Einsteins lamentations the universe does indeed play dice) an electron can tunnel away from the conducive silicon keeping it in place. Usually, it can only get a couple atoms and then return. occasionally, it may make it to an adjacent transistor (those things are VERY close together). Normally, this doesn't cause a problem, because you need a lot of stray electrons to make the journey to cause an error in how that gate will be read. The problems start to occur when an electron sticks to one of the silicon atoms in the non-conducive, or knocks another electron out of it's orbit. This process is called silicon degradation. Over time, usually many years of use, a path is formed by the tunneling electrons between the two gates- therefore forming a complete circuit to which the electrons can escape and flow freely. This is what causes the problems.

    The more energy an electron has, the far more likely it will be to tunnel, which is why HOT CPU=BAD and also WHY we have these specification values, they aren't just pulled out of their asses like the values you might read in a "i7 tweaking guide", they are based on actual science. Running a CPU at a temperature higher then those numbers pretty much guarantees silicon degradation.

    Silicon degradation=damage.


    I was trying to dereference Null Pointers before it was cool.

    Salmon Trout

    • Guest
    Re: Intel Core i7 930 running hot or not?
    « Reply #22 on: September 17, 2010, 01:57:13 PM »
    Big more and more resembles an irresponsible and mischievous troll. I believe I know his name.


    Azzaboi



      Apprentice
    • Aaron's Game Zone
    • Thanked: 37
      • Aaron's Game Zone
    • Experience: Experienced
    • OS: Windows 7
    Re: Intel Core i7 930 running hot or not?
    « Reply #23 on: September 17, 2010, 02:08:37 PM »
    It's an overclocked i7-930 (from 2.8 to 4GHz), try reading the doco on that...

    I only said 100C is all the i7 Core CPUs safe switch (that's documented).
    Saying "it can runs fine at 100c" but you missed out I also said not recommended.

    Quote
    Ahh, I know what your talking about, the magical "change the laws of physics so metal and earth elements no longer contract and expand at a different speed" device. Amazing what they can do with technology, what with the ability to magically change the set laws of this universe.
    Yeah it's called using different types of metals, etc, gold reacts different to copper, etc. Look it up, year 9 sciences - it's real magic. They use solid high-density copper and then plate it. They must of used magic for changing it's density too.

    To overclock one normally increases voltage.

    If you don't think overclocking will need to increase voltage which will then increase default temperature settings without using any cooling system then you are in the universe of magic...
    Aaron's Game Zone
    The best free online flash games: http://azzaboi.weebly.com

    Play Games - Play free games at Play Games Arcade

    BC_Programmer


      Mastermind
    • Typing is no substitute for thinking.
    • Thanked: 1140
      • Yes
      • Yes
      • BC-Programming.com
    • Certifications: List
    • Computer: Specs
    • Experience: Beginner
    • OS: Windows 11
    Re: Intel Core i7 930 running hot or not?
    « Reply #24 on: September 17, 2010, 05:11:44 PM »
    It's an overclocked i7-930 (from 2.8 to 4GHz), try reading the doco on that...
    I don't have to. It almost certainly the same as those listed.

    Quote
    I only said 100C is all the i7 Core CPUs safe switch (that's documented).
    refs please. (genuinely curious about it also)
    Quote
    Saying "it can runs fine at 100c" but you missed out I also said not recommended.
    saying it at all is stupid. It's like saying "you can run your car over pedestrians, but it's not recommended" It's pointless to even bring it up.

    Quote
    Yeah it's called using different types of metals, etc, gold reacts different to copper, etc. Look it up, year 9 sciences - it's real magic. They use solid high-density copper and then plate it. They must of used magic for changing it's density too.
    they dope silicon with gallium. Gold is preferred to form the integrated circuits of processor cores not because it has a lower thermal expansion factor but because it is better as a conductor. (less resistance=less heat=less atomic energy=less quantum incursion into the undoped silicon.

    Copper expands more then gold, so using it would make these "problems" you claim occur from thermal expansion worse, not better.
    Quote
    To overclock one normally increases voltage.
    Yes, and if I may remind you, that the more energy the atoms have the more frequent and "powerful" their incursions into the undoped silicon are, and the faster they will create a trace through which they can flow freely? More voltage=more heat=more energy=more damage. I never said overclocking didn't involve increasing the voltage, anyways. Although I should have, since it means overclocking increases the rate of silicon degradation.

    Quote
    If you don't think overclocking will need to increase voltage which will then increase default temperature settings without using any cooling system then you are in the universe of magic...
    I never said that overclocking wouldn't require increasing the voltage. But it certainly doesn't magically change the quantum properties so that quantum tunnelling, which is as I noted previously, is the reason that heat causes damage, not metal expansion, doesn't occur. adding voltage to a processor doesn't magically make it able to withstand more temperature, the actual ability of the pure silicon to prevent quantum tunnelling remains unchanged, and the higher voltage makes it easier for electrons to tunnel through. and "contaminate" neighbor transistors, which will cause any number of unpredictable and untraceable errors.
    I was trying to dereference Null Pointers before it was cool.

    patio

    • Moderator


    • Genius
    • Maud' Dib
    • Thanked: 1769
      • Yes
    • Experience: Beginner
    • OS: Windows 7
    Re: Intel Core i7 930 running hot or not?
    « Reply #25 on: September 17, 2010, 08:19:39 PM »
    Most of your alleged hard earned wisdom has no basis in fact...which is why i suggested doing some research instead of being the 1st one to hit the Post button without considering the consequences...

    These are other peoples machines we are working with...and as a Help Forum it's best to give good solid advice...
    " Anyone who goes to a psychiatrist should have his head examined. "