Hi,
i just have bought a Minipro TL866CS and received the programmer yesterday
my purpose for buying the programmer is to reflash my eeprom on a HP elitebook
8760w.
i have updated my bios with a wrong one, and im trying to reflash with the right one this time cause my laptop wont start up the led do get on but all i get is black screen i do hear the Fan is running but no screen just a black screen well its kind of a black screen i do think i see a back light on the screen.
the chip on my laptop is a winbond 25Q64BV.
i have a ll the tools to re flash the chip. the only problem i have is i want to use the test clip to reflash the chip without desoldering the chip from the motherboard.
i also have the right adapter for the minipro TL866CS.
but every time i try to find the chip with the software its showing a error with
ic is in reverse or damage message in software.
i know the chip is still ok because i had desolder the chip before and had use it on a different programmer.
anyway hope someone could help me out how to attach all the test clip cables.
if someone could tell me step by step what to do that would be great.
i will put the links of the manual of the winbond chip and the programmer i have bought below the post.
the one thing i am concerned about are the colors of the test clip attached to the adapter and the winbond chip.
here is how i have i attached i dont know if this is right or wrong: I'm a newbie with this kind of work.
1-Red
2-Brown
3-Black
4-White
5-Orange
6-Yellow
7-Green
8-Blue
the programmer with the testclip and the adapter
http://www.ebay.com/itm/321085105494the winbond 25Q64BV eeprom manual:
http://www.winbond-usa.com/NR/rdonlyres/591A37FF-007C-4E99-956C-F7EE4A6D9A8F/0/W25Q64BV.pdf