PC freezing on startup after graphics card upgrade

[ceolan_mcguire]

Hello i just upgraded my graphics card but now when i start my PC it freezes on the screen where i enter my password. The PC allows me to boot when i use safe mode

GTX 770 2GB OC Version
Coolermaster 500W
GByte B85M-D3H MOBO
Intel Core i5 4430 S1150 Ret

[DaveLembke]

What card did you have installed before this one, and what OS / version are you running?

[ceolan_mcguire]

What card did you have installed before this one, and what OS / version are you running?

My previous card was the Radeon HD 7770 and i have windows 7. I am also now getting a BSOD that says 0x0000000000000003, 0xFFFFFA8006D3EB30, 0xFFFFFA8006D3EE10

[patio]

Too many zeroes...post the entire BSOD message.

[ceolan_mcguire]

Too many zeroes...post the entire BSOD message.

Is there somwhere that i can go on safe mode to show me what the message was? It only pops up for a couple of seconds so i cant see the whole thing

[ceolan_mcguire]

I found this, not sure if its whats needed:
BCCode: f4
BCP1: 0000000000000003
BCP2: FFFFFA8004C031B0
BCP3: FFFFFA8004C03490
BCP4: FFFFF80000377E240
OS Version: 6_1_7600
Service pack: 0_0
Product: 256_1

[patio]

Go to safemode...in Control Panel/System/Hardware/ uncheck "auto restart on errors"...
Re-boot and copy/paste the BSOD.

[ceolan_mcguire]

This is exactly what the BSOD shows:


A problem has been detected and windows has been shut down to prevent damage to your computer.

A process or thread crucial to system operation has unexpectedly exited or been terminated.

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow
these steps:

Check to make sure any new hardware or software is properly installed. If this is a new installation ask your hardware
or software manufacturer for any windows updates you might need.

If promlems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as
shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced
startup options, and then select safe mode.

Technical information:

*** STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA8006D0F060, 0xFFFFFA8006D0F340, 0xFFFFF800043CF240)

[ceolan_mcguire]

Okay i fixed my first problem by doing a fresh install of windows 7 but now when i try to connect to a wireless network my PC freezes and restarts and somtimes gets a BSOD