Old card reader - but where do I put the connectors on the mainboard?

[Chris G.]

Helo guys

Yesterday I opened my old PC which was waiting lonely in the cellar. I took out some parts which can still be used. Among these there is an old card reader from Medion (German firm). I still have all the cables but don't really know where to put them on the mainboard (Asrock 970 Pro 3 R2.0).
Among the pictures I give to you there also is a schematic which shows how the card reader was built in in my old PC.
I hope you can help me.
I don't need any advices such as: "Buy a new one". I'm fine with the speed and everything.
Already thanks a lot.
Chris G.

The Pictures were too big, so that I uploaded them on SkyDrive:
http://sdrv.ms/17XULmi
Picture of the Mainboard from: http://www.planet3dnow.de/vbulletin/attachment.php?attachmentid=26743&stc=1&d=1356482355

[Salmon Trout]

Probably it plugs into an mainboard USB header; this is the usual way.

[Chris G.]

Okay thx
I tried it, but sadly there weren't enough free connectors

Closed

[Salmon Trout]

Okay thx
I tried it, but sadly there weren't enough free connectors

Closed

USB Header splitter cable... around $10

"10-Pin USB/AC97/HD-Audio Internal Header Y Splitter Cable (5cm)"

widely available including here

http://www.moddiy.com/products/10%252dPin-USB%7B47%7DAC97%7B47%7DHD%252dAudio-Internal-Header-Y-Splitter-Cable-%285cm%29.html

[Chris G.]

That was something I thougt about too, but the green and the red cable aren't the same. The green cable does not fit in any of the plugs/connectors.
In spite of everything I thank you a lot.
After all I think I'll buy a new card reader, something like this:
http://www.caseking.de/shop/catalog/Zubehoer/Cardreader-writer/Akasa-AK-HC-05U3BK-Internal-6-Port-USB-30-Card-Reader-schwarz::22444.html?adword=google/pla/PUP_Media_PC/Cardreader/22444/&gclid=CP3xzPO__boCFYdf3godEFwASA
Still have a nice sunday.
Chris G.