Welcome guest. Before posting on our computer help forum, you must register. Click here it's easy and free.

Author Topic: need help setting up case sound and mic  (Read 2545 times)

0 Members and 1 Guest are viewing this topic.

patrick torkelsen

  • Guest
need help setting up case sound and mic
« on: November 13, 2005, 08:10:20 PM »
ok i have an achilles computer case that can be seen on
www.psicase.com/achilles.htm and the audio hookup at the front of the case is where my problem is i dont know which pins go where they go on my sound blaster live card with the model number CT4670 there are 8 pins

mic in......front microphone input signal
mic power......front microphone power
ground......front audio ground....there are 2 of these one for mic one for sound
L out......front left channel audio signal
R out........front right channel audio signal
L ret......rear left channel audio signal
R ret.......rear right channelaudio signal

if you can help or have any suggestions it would be much appreciated

pcwizard



    Hopeful

  • A computer is for life, not just gaming!!
  • Thanked: 2
    Re: need help setting up case sound and mic
    « Reply #1 on: November 14, 2005, 01:14:16 PM »
    are you sure?

    The leads from the front audio port on your case usually connect to the motherboard, on the section for that purpose.

    They run along the data channels and connect to the pci slot where you sound card is connected to and then from there through your speakers.

    Your motherboard manual will show you where they should connect to.

    try http://motherboards.mbarron.net/index2.html for more info.
    A computer is for life....not just gaming!!