Welcome guest. Before posting on our computer help forum, you must register. Click here it's easy and free.

« previous next »
Pages: [1]   Go Down

Author Topic: No display  (Read 1972 times)

0 Members and 1 Guest are viewing this topic.

Idiotversion

  • Guest
No display
« on: July 25, 2006, 05:03:36 PM »
Ok, well this is my first computer ive made before. I have everything hooked up to the right place and turn it on and i get 2 beeps really close together and then 6 short beeps right after and then nothing. The motherboard I am using is this http://usa.asus.com/products.aspx?l1=3&l2=12&l3=31&model=179&modelmenu=1 it has no moniter slot so i used a pci vid card that has worked for me in the past and get nothing. i also tried a agp vid card and still get nothing. so what do i do???
Logged

GX1_Man

  • Guest
Re: No display
« Reply #1 on: July 25, 2006, 05:08:46 PM »
Here is some general information. Those beep codes are diagnostic:

http://www.computerhope.com/beep.htm

Check on the ASUS site for their specific beep codes if this does not help you pinpoint the problem.  ;)
Logged

Idiotversion

  • Guest
Re: No display
« Reply #2 on: July 25, 2006, 05:10:34 PM »
ive checked those but i really dont kno what to do
« Last Edit: July 25, 2006, 05:11:04 PM by Idiotversion »
Logged

GX1_Man

  • Guest
Re: No display
« Reply #3 on: July 25, 2006, 06:16:35 PM »
If you don't know what to do, and have never done this before, then it may be time to go to the shop. Don't feel bad. Sometimes you have to pay for knowledge and experience.

A misbuild is the most common problem.
Logged
Pages: [1]   Go Up
« previous next »