Program performed Illegal Operation/iexplore IPF... again & again!

[hlucas]

Hi...I have been trying to figure out why this keeps happening...and have to close...I thought I had it figured out, but to no avail..here it is again. I do have a copy of the details and could paste it here...

Had help deleting old norton and cleaning up everything with evilfantasy yesterday...thinking it may be a virus and  have had trouble with setting avast right, but have posted this using the old post and waiting for evil to get back...

But this is the old issue and hope you can help...I will paste the error message after I hear from you and if you want to see it..Hope you could help me...Thanks H

[Broni]

Yes, please.

[hlucas]

As you may gather you are dealing with a Not Expert here...lol..


This 1st one happened yesterday after evilfantasy and I did the cleaning...
Then below that are 2  examples of many that I have received before yesterday...
Seems to have started slowly in July sometime and progressed slowly to happening at least 2 or 3 times during the day. And all different types?

----------------------------------------------

IEXPLORE caused an invalid page fault in
module <unknown> at 0000:fffffffe.
Registers:
EAX=40000001 CS=015f EIP=fffffffe EFLGS=00010212
EBX=079c173c SS=0167 ESP=1059feb0 EBP=1059fec0
ECX=08056ee8 DS=0167 ESI=099e6f20 FS=749f
EDX=08a86c60 ES=0167 EDI=1059fed4 GS=0000
Bytes at CS:EIP:

Stack dump:
079c173c 00000004 1059fed4 099e6f20 1059ff34 0ab7a2a2 099e6f20 7c001b64 099e6ef0 079c1788 079c1738 7c001b33 0ab7a284 00000004 1059ff80 00000001
------------------------------------

(2 that I had copied from before yesterday)

-------------------------------------
-IEXPLORE caused an invalid page fault in
module MSJAVA.DLL at 0177:7c024a60.
Registers:
EAX=00000005 CS=0177 EIP=7c024a60 EFLGS=00010213
EBX=153d65c8 SS=017f ESP=0d2afbfc EBP=0a1fbfa8
ECX=1035f7c4 DS=017f ESI=00000000 FS=1227
EDX=14528381 ES=017f EDI=153fe5d8 GS=0000
Bytes at CS:EIP:
8b 06 3d ff 0f 00 00 0f 83 53 79 02 00 83 f8 03
Stack dump:
00000000 153d65c8 153fe5d8 7c0dc0a8 7c02479a 153d65c8 153fe5d8 00000000 000034e8 00000000 00000080 7c0dc0a8 7c0245cd 00000000 00000000
-------------------------------------------------
IEXPLORE executed an invalid instruction in
module <unknown> at 0000:0000000b.
Registers:
EAX=00000012 CS=0177 EIP=0000000b EFLGS=00010202
EBX=6503621a SS=017f ESP=09fafca4 EBP=09fafd50
ECX=0000008a DS=017f ESI=00000177 FS=4667
EDX=0696ae60 ES=017f EDI=bff92bf7 GS=0000
Bytes at CS:EIP:
f0 65 04 70 00 65 04 70 00 54 ff 00 f0 6b 94 00
Stack dump:
09fafcd4 00000004 7c001c48 056022b0 0000000c 05592e90 0571067f 09fafce4 06a591e8 0696fc38 06953a38 09fafd54 00000101 ffffffff 00000004 088e486a

-------------------------------------
I have a pile of partial examples that I started to write down by hand...Here are a few...Mostly done in hast and not complete...
---
MICROSOFT HAS ENCOUNTERED A PROBLEM AND MUST CLOSE
Microsoft Internet Explorer
Error Signature
AppName:iexplore.exe
AppVer:6.0.2800.1106
ModName:Unknown
ModVer:0.0.0.0 offset.000000 00
---
Same as above w/
ModName:flash9f.ocx
ModVer:9.0.124.0 offset 00186.27
---
IEXPLORE Caused a General Protection Fault in
Module USER.EXE @0003:0006c50
---
This Program has performed an illegal op. and will shut down.
If problem persists contact the program vender
---
IEXPLORE executed an invail. instruct. in Module
FLASH9F.OCX@ 0177:300556.27
---
IEXPLORE executed an invail. instruct. in Module
<unknown>@00000:0000017
Invailid page default @ KERNEL 32.DLL 0177:bff86876
---
QUICKVIEW caused invalid page default
---
AppVer:MODULE 32 KERNEL32.DLL
JAVACYPT.DLL
signature fec fo 4BD
CPU Vendor Code: 85a72094 30224600-0000000001
---
GPF in MMKEYBD module User.EXE-C0003-00006c50
---
An exception OE has occured @ 0028:C0030CA8 in VXD
It was called from 0028C030CE7 in VXD
----------------------------------------
NOTE:
On the ones that say to send error report...I have clicked send and what happens is...it will start trying to do a dial-up connection...and I have Ethernet now...So somethiing there is not set up right?

GoodLuck and will be checking for reply...Thanks Herb

[Broni]

Is this Win 98, or ME?
Do you have Windows CD?

[hlucas]

Its Win 98...Yes I have the CD

[Broni]

Try System File Checker: http://www.helpwithwindows.com/windows98/start-142.html

[hlucas]

Ok Broni...Have to go out for a minute....be back in a bit....then I'll try it and let you know whats happening..
Do you want me to paste the info in here?

[Broni]

There will be no info. SFC either finds some corrupt files, or it doesn't. When latter happens, there is no message of any type.

[Ivy]

Wasn't this in the virus section too!!

Things keep returning to Broni ultimately, including some people aswell....