can someone edit my autoexec.bat and config.sys please

[nitsudm]

Ok, so I think I have most of this figured out here all but one line I think? I've loaded the driver for the ethernet card but when I get past the startnet.bat - (I think) and I receive an error that: "Lantastic Redirector (REDIR) must be installed". If I place the redir.exe somewhere in the autoexec.bat I get the error: "Netbios is not present". What should I do with the redirector? Here's the config.sys, autoexec.bat, startnet.bat,

Here is the Config.sys and it all seems to work:

Code: [Select]

DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE NOEMS novcpi /i=e000-efff
DEVICE=C:\DOS\SETVER.EXE
device=c:\lantasti\protman.dos /I:C:\lantasti
device=c:\lantasti\pcind.dos
DOS=UMB,HIGH
BUFFERS=40
FILES=199
LASTDRIVE=Z
FCBS=4,0
SHELL=C:\COMMAND.COM /P /E:1024
STACKS=9,256
[COMMON]
And here's the Autoexec.bat:

Code: [Select]

@ECHO OFF
LH /L:0;1,45488 /S c:\dos\SMARTDRV.EXE /X
LH /L:1,13984 c:\dos\share
PROMPT $P$G
set clipper=f085
PATH \;C:\DOS;
SET COMSPEC=c:\COMMAND.COM
LH /L:0;1,50304 /S COMMAND /E:1024 /C\LANTASTI\STARTNET.BAT
C:\LANTASTI\REDIR.EXE
path=d:\vss;%path%
d:\lantasti\net clock \\master
SET VSSTERM=2
D:

And here is the Startnet.bat:

Code: [Select]

@echo off
rem LANtastic  Version 6.00  installed 95/12/00 14:45:58
rem (for DOS)

C:
cd C:\LANTASTI

SET LAN_CFG=C:\LANTASTI

rem If LANtastic is disabled, skip everything.
IF EXIST DISABLED GOTO :STARTNET_DONE

@echo ===== Begin LANtastic configuration =====

PATH C:\LANTASTI;%PATH%
SET LAN_DIR=C:\LANTASTI.NET

LOADHIGH AI-NDIS BIND_TO=PCIND_NIF
AILANBIO @STARTNET.CFG

REDIR MASTER @STARTNET.CFG

IF EXIST NOSHARE GOTO :NOSHARE
SERVER C:\LANTASTI.NET @STARTNET.CFG
NET LOGIN \\MASTER
GOTO :CONTINUE

:NOSHARE
@echo LANtastic server was installed but turned off.

:CONTINUE

rem If CONNECT.BAT exists, run it to set up connections.
IF EXIST CONNECT.BAT GOTO :CONNECT

rem Otherwise set up connections specified during install.
net use d: \\master\c-drive
NET USE LPT1: \\MASTER\@PRINTER
NET LPT TIMEOUT 10
GOTO :CONNECT_DONE

:CONNECT
@echo Setting up LANtastic connections from CONNECT.BAT
rem Build CONNECT.BAT like this: "NET SHOW/BATCH > C:\LANTASTI\CONNECT.BAT"
rem   (or run the batch file SETNET.BAT)
call CONNECT.BAT

:CONNECT_DONE
NET POSTBOX

@echo ===== End LANtastic configuration =====

:STARTNET_DONE
cd \
And when I boot up I F8 and do it line by line and I get this below:

Code: [Select]

Starting MS-Dos...

MS-DOS will prompt you to confirm each Config.sys command.
DOS=UMB,HIGH [Y,N]?Y
DEVICE=C:\DOS\HIMEM.SYS [Y,N]?Y

HIMEM is testing extended memory...done.
DEVICE=C:\DOS\EMM386.EXE NOEMS NOVCPI /I=E000-EFFF [Y,N]?Y
DEVICE=C:\DOS\SETVER.EXE [Y,N]?Y
DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI [Y,N]?Y

MS DOS LAN Manager Protocol Manager v2.0
DEVICE=C:LANTASTI\PCIND.DOS [Y,N]?Y
Loading PCIND.DOS..........
RTL8029 driver (V5.0) is installed

BUFFERS=40 [Y,N]?Y
FLIES=199 [Y,N]?Y
LASTDRIVE=Z [Y,N]?Y
FCBS=4,0 [Y,N]?Y
SHELL=C:\COMMAND.COM /P /E:1024 [Y,N]?Y
STACKS=9,256 [Y,N]?Y

Process AUTOEXEC.BAT [Y,N]?Y
ECHO OFF [Y,N]?Y
LH /L:0;1,45488 /S c:\dos\SMARTDRV.EXE /X [Y,N]?Y
LH /L:1,13984 c:\dos\share [Y,N]?Y
PROMPT $P$G [Y,N]?Y
set clipper=f085 [Y,N]?Y
PATH \;C:\DOS; [Y,N]?Y
SET COMSPEC=c:\COMMAND.COM [Y,N]?Y
LH /L:0;1,50304 /S COMMAND /E:1024 /C\LANTASTI\STARTNET.BAT [Y,N]?Y
C:\LANTASTI\REDIR.EXE [Y,N]?Y
LANtastic (R) Redirector V6.00/AI - (C) Copyright 1994 ARTISOFT Inc.
Serial Number FCA-122234 - 1  node license.

ERROR: NETBIOS is not present
path=d:\vss;\;D:\DOS; [Y,N]?Y
d:\lantasti\net clock \\master [Y,N]?Y

ERROR: LANtastic (R) Redirector (REDIR) must be installed
SET VSSTERM=2 [Y,N]?Y
D: [Y,N]?Y
D:\>

Can any one see what is wrong here? I want this computer (Acually the D: drive) to be shared by two terminals and I want this computer to be named MASTER. I don't understand the "redir" or the netbios part of this. Sorry this is so long but I feel like i'm really close. Thanks a lot

[nitsudm]

Anyone have any information on the Netbios setup in ms-dos 6.22? as above?

Also on line 10 of the autoexec.bat I have:

Code: [Select]

path=d:\vss;%path%
and when that runs in dos prompt it turns into:

Code: [Select]

path=d:\vss;\;D:\DOS;
why does it do that?