Author Topic: Web Cam? (Read 9434 times)

squall_01 · « **on:** June 02, 2009, 04:09:55 PM »

My sister had a logitech cam but since she got her new laptop she doesnt need it any more. The thing is that she left the driver in LA and wont be back till this fall. Not real sure. At any rate I dont know what it is. I can plug it n my laptop an it works but it cant be seen in the batman.

Aegis · « **Reply #1 on:** June 02, 2009, 04:17:55 PM »

Have you checked the Logitech site for drivers?

"in the batman" - your desktop - I remember, now. What operating system does it run?

squall_01 · « **Reply #2 on:** June 02, 2009, 04:20:19 PM »

yes, alot of them look the same however. There you go.

Currently XP but I just need it so I dont have to worry about it once its up an running like it should.

Aegis · « **Reply #3 on:** June 02, 2009, 04:23:50 PM »

I'm surprised XP doesn't see the camera!

I thought you'd tell us it was Win2K or something. How old is the camera? Shouldn't matter...

USB 1.1 or 2.0?

squall_01 · « **Reply #4 on:** June 02, 2009, 04:31:41 PM »

I see's it just asking for a driver. I would have that on a second drive latter maybe. Its not all that old. Its like two years. 2.o

Aegis · « **Reply #5 on:** June 02, 2009, 04:33:27 PM »

See if you can get something on it from the Logitech web site.

squall_01 · « **Reply #6 on:** June 02, 2009, 04:35:48 PM »

I tried but there is like six that could be it.

BC_Programmer · « **Reply #7 on:** June 03, 2009, 05:35:25 AM »

that's six to try.

squall_01 · « **Reply #8 on:** June 03, 2009, 05:55:45 AM »

on dial up

GlitchPC · « **Reply #9 on:** June 03, 2009, 06:05:55 AM »

Easier if there was a model number for this web cam.

squall_01 · « **Reply #10 on:** June 03, 2009, 06:08:26 AM »

is that easy to find? I dont have anything but the camera

Carbon Dudeoxide · « **Reply #11 on:** June 03, 2009, 06:09:38 AM »

Is there a name or model number on the webcam....?

squall_01 · « **Reply #12 on:** June 03, 2009, 06:10:31 AM »

just logitech

BC_Programmer · « **Reply #13 on:** June 03, 2009, 06:10:59 AM »

usually on the bottom.

squall_01 · « **Reply #14 on:** June 03, 2009, 06:14:06 AM »

no seen number I see

GlitchPC · « **Reply #15 on:** June 03, 2009, 06:22:00 AM »

It's on there...you'll just have to use a magnifying glass. All products have model numbers on them...somewhere.

Carbon Dudeoxide · « **Reply #16 on:** June 03, 2009, 06:27:17 AM »

Any number at all might work.

GlitchPC · « **Reply #17 on:** June 03, 2009, 06:37:26 AM »

Start here: http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

If you can't find one that matches, then go here: http://www.logitech.com/index.cfm/405/&cl=us,en&legacy=1

Aegis · « **Reply #18 on:** June 03, 2009, 06:43:22 AM »

Put the camera on the laptop, where it works, and see what information you can find about it in Control Panel and Device Manager.

patio · « **Reply #19 on:** June 03, 2009, 06:51:55 AM »

And /or run an Everest Home report...

Aegis · « **Reply #20 on:** June 03, 2009, 12:12:56 PM »

Thank you, Sir Edmund Hillary -- always going on about Everest!

squall_01 · « **Reply #21 on:** June 03, 2009, 03:14:18 PM »

I'll try that was thinking that I couldnt do something along those lines. Patio I dont have it setup too really were I could so it wont work. There is now seen number, the thing is that I am given up graphic's for speed so its hard to tell and if I turned them on it would only be slow.

patio · « **Reply #22 on:** June 03, 2009, 03:20:41 PM »

Not sure what this means but all you have to do is DLoad and install Everest Home and run the scan with the Cam connected...

squall_01 · « **Reply #23 on:** June 03, 2009, 03:29:03 PM »

So I dont have to be connected? I haev no protection on this machine an its not setup to connect.

GlitchPC · « **Reply #24 on:** June 03, 2009, 04:19:19 PM »

Look at the two links I posted...

Which of the cameras looks like the one you have?

Use the driver for that camera.

Sheesh...a two page thread for something so simple...a caveman could do it.

squall_01 · « **Reply #25 on:** June 03, 2009, 05:00:13 PM »

I'll look at it later. A distorted view wont change if its set that way.

BC_Programmer · « **Reply #26 on:** June 03, 2009, 05:02:35 PM »

I suggest this be locked. Squall has ALL the information he needs and insists on "looking at it later" just as he does in ALL of his threads. And then, a few months later he bumps his old topic saying he has time, people post a few things, and then suddenly he has to do it later again. I wonder how he get's anything done.

squall_01 · « **Reply #27 on:** June 13, 2009, 01:50:03 PM »

by doing it later on when I have more time. The following week I found the manual an was able to get a driver for it. Its working good for the most part.

Aegis · « **Reply #28 on:** June 13, 2009, 02:07:43 PM »

You might have let us know...

squall_01 · « **Reply #29 on:** June 13, 2009, 03:25:47 PM »

? I didnt find it till like last week.

Computer Hope Forum

News:

Author Topic: Web Cam? (Read 9434 times)

squall_01

Aegis

squall_01

Aegis

squall_01

Aegis

squall_01

BC_Programmer

squall_01

GlitchPC

squall_01

Carbon Dudeoxide

squall_01

BC_Programmer

squall_01

GlitchPC

Carbon Dudeoxide

GlitchPC

Aegis

patio

Aegis

squall_01

patio

squall_01

GlitchPC

squall_01

BC_Programmer

squall_01

Aegis

squall_01