No USB working?

[Cityscape]

Everest - does not work, freezes at "Scanning PCI Devices"
AIDA32 - same problem as Everest
Belarc - works but does not give motherboard info

[Cityscape]

SIW worked great thanks.

- Here is the info it gives me on the Motherboard section -
Northbridge - VIA Apollo VP3 revision 04
Southbridge - VIA VT82C586 revision 04
CPU - AMD K6 3D processor
Cpu Socket - Socket 7 (321)

So what do I need to find my motherboard driver, North bridge or South? And do have any recommended place for me to look for a driver at?

[billrich]

Good Luck

[soybean]

Good Luck

Gee, that was helpful.   

[Cityscape]

Gee, that was helpful.   

Haha sure was. 
I still don't know whether to look for the Sth bridge model number or the Nth bridge number when looking for a driver.

[patio]

Forget the bridges...what is the *censored* MBoard listed as ? ?

[billrich]

Gee, that was helpful.   

I erased my suggestion.  I did not realize all the top guns were on hand.

Carry on Major,  I'll be in the area all day.

[patio]

Mr. Edit...

[BC_Programmer]

I've always found it useful to even look at the mainboard, 

my K6-2 uses a MVP-3G (I think) motherboard;  but, given the age of the machine it would make sense if the operating system automatically installed and dfetected the chipset drivers.

Have we tried removing everything related to USB from device manager and rebooting?

[Cityscape]

Forget the bridges...what is the <censored> MBoard listed as ? ?

I does not list a motherboard model. It just says Motherboard and lists the bridges.
CPU-Z also gives me just the following:
Chipset - VIA Apollo VP3 revision 04
Southbridge - VIA VT82C586

[Computer_Commando]

I've always found it useful to even look at the mainboard...

There's a part number printed on it somewhere.

[BC_Programmer]

There's a part number printed on it somewhere.

well yeah.... that's kinda what I meant...