Welcome guest. Before posting on our computer help forum, you must register. Click here it's easy and free.

Author Topic: Hardrive boot problem  (Read 3044 times)

0 Members and 1 Guest are viewing this topic.

derekcantona7

    Topic Starter


    Starter

    Hardrive boot problem
    « on: January 28, 2010, 02:49:43 PM »
    Hi All,
    i am having a problem with my PC booting:

    i plug in PC - computer powers on automatically
    the screen comes on with "platinum" - no beeps

    then an info screen comes on : (sometimes the screen appears frozen and nothing happens)
            ide prim master:none
            ide prim slave: none
            ide sec master: none
            ide sec slave: HL-DI-STDVD-ROM CDR8164B 0L06

            ide third master:none
            ide fouth master:WD360CD-00FLA2 31.08F31

            ide fifth master: none
            ide sixth master: none
            cmos checksun error - defaults loaded

    Press F1 to continue, del to enter setup



    So i press F1, windows loading screen appears and then it reboots it self - back to start - this time with no info screen

    The computer was put together by a friend 4 or 5 years ago with seperate parts as far as i know. recently another friend formatted the PC and it was working fine until very recently. now its not working properly at all.

    if anyone has any ideas, any help would be appreciated please.

    thanks & sorry for long winded mail...

    patio

    • Moderator


    • Genius
    • Maud' Dib
    • Thanked: 1769
      • Yes
    • Experience: Beginner
    • OS: Windows 7
    Re: Hardrive boot problem
    « Reply #1 on: January 28, 2010, 03:41:38 PM »
    Your hard drives are not being detected.
    Replace the CMOS battery...about the size of a dime on the MBoard...Part # CR2032 available anywhere.

    Remove all power to the machine when doing so.

    Then plug it back up and power up...you may have to re-boot 1 or twice.
    " Anyone who goes to a psychiatrist should have his head examined. "

    Computer_Commando



      Hacker
    • Thanked: 494
    • Certifications: List
    • Computer: Specs
    • Experience: Expert
    • OS: Windows 10
    Re: Hardrive boot problem
    « Reply #2 on: January 28, 2010, 05:03:43 PM »
    Your hard drives are not being detected...
    This looks like a hard drive to me.  Probably a SATA, too.
    ide fouth master:WD360CD-00FLA2 31.08F31

    patio

    • Moderator


    • Genius
    • Maud' Dib
    • Thanked: 1769
      • Yes
    • Experience: Beginner
    • OS: Windows 7
    Re: Hardrive boot problem
    « Reply #3 on: January 28, 2010, 05:22:03 PM »
    Noce catch CC...
    But i'm curious why it would be set as 4th IDE device...

    Plus that model does not show up @ WD's site...
    " Anyone who goes to a psychiatrist should have his head examined. "

    Computer_Commando



      Hacker
    • Thanked: 494
    • Certifications: List
    • Computer: Specs
    • Experience: Expert
    • OS: Windows 10
    Re: Hardrive boot problem
    « Reply #4 on: January 28, 2010, 05:39:55 PM »
    Noce catch CC...
    But i'm curious why it would be set as 4th IDE device...
    3rd, 4th, 5th, 6th masters are all SATA's running in IDE mode.

    ...Plus that model does not show up @ WD's site...
    WD360GD is a 36GB 10,000rpm SATA Raptor, GC is probably a little earlier model.
    http://www.wdc.com/en/library/sata/2879-001069.pdf
    « Last Edit: January 28, 2010, 05:52:56 PM by Computer_Commando »

    patio

    • Moderator


    • Genius
    • Maud' Dib
    • Thanked: 1769
      • Yes
    • Experience: Beginner
    • OS: Windows 7
    Re: Hardrive boot problem
    « Reply #5 on: January 28, 2010, 06:02:24 PM »
    Thanx for the clarification.
    " Anyone who goes to a psychiatrist should have his head examined. "

    derekcantona7

      Topic Starter


      Starter

      Re: Hardrive boot problem
      « Reply #6 on: February 03, 2010, 12:26:15 PM »
      thanks for the replies people.

      sorry for late reply - my access to a PC is limited recently.

      i am unsure now what to do:
       - should i replace the battery?
       - is it the hard drive that is at fault?

      thanks again

      Computer_Commando



        Hacker
      • Thanked: 494
      • Certifications: List
      • Computer: Specs
      • Experience: Expert
      • OS: Windows 10
      Re: Hardrive boot problem
      « Reply #7 on: February 03, 2010, 02:24:12 PM »
      ...i am unsure now what to do:
       - should i replace the battery?
       - is it the hard drive that is at fault?...
      First try a new battery, if that doesn't fix it, then download WD software for testing hard drive.

      dahlarbear



        Specialist

        Thanked: 101
        Re: Hardrive boot problem
        « Reply #8 on: February 04, 2010, 02:15:40 AM »
        So i press F1, windows loading screen appears and then it reboots it self - back to start - this time with no info screen
        If this is the Window logo with the "loading" progress bar beneath it, you should stop the auto reboot on system error so you can tell us what the Blue Screen of Death (BSOD) says.

        Report the "exact" STOP code string with its four parameters as well as any short error string and/or software module it might name.

        Use the <F8> function key during system startup to access the Windows Advanced Options Menu.  Tap the <F8> key once or twice per second as you startup the computer (or immediately after POST completes and screen flashes black prior to displaying Windows XP logo with its processing bar display).

        From the Windows Advanced Options menu, use the up/down arrow keys to select the "Disable automatic restart on system failure" and hit <Enter>.

        derekcantona7

          Topic Starter


          Starter

          Re: Hardrive boot problem
          « Reply #9 on: February 08, 2010, 10:43:32 AM »
          so i tried the new battery - and it appeared to work -woowoo!

          then i tried hooking up my external harddrive and the pc froze!

          it wouldnt work then after a few reboots- so i left it overnight and it worked first time!

          hopefully it will stayed working for me.

          thanks for the help people.