Welcome guest. Before posting on our computer help forum, you must register. Click here it's easy and free.

Author Topic: Motherboard madness  (Read 3323 times)

0 Members and 1 Guest are viewing this topic.

Chadders

    Topic Starter


    Greenhorn

    • Experience: Familiar
    • OS: Windows 8
    Motherboard madness
    « on: October 03, 2015, 08:45:41 PM »
    In an attempt to learn more about computer hardware, I am going to attempt to install my new motherboard myself. However I have heard tales of all the horrible things that could happen; electrostatic charges killing wiring etc.

    What specifics do I need to know to make sure I don't kill my brand new motherboard?

    Geek-9pm


      Mastermind
    • Geek After Dark
    • Thanked: 1026
      • Gekk9pm bnlog
    • Certifications: List
    • Computer: Specs
    • Experience: Expert
    • OS: Windows 10
    Re: Motherboard madness
    « Reply #1 on: October 03, 2015, 09:33:05 PM »
    What you need is hands on experience. It is not easy to learn it from a book. You might try to get some old worn out computers form friends and try to take part and assemble again. Also, watch some of the many YouTube fidoes. Some are completely wrong. Try to understand how people can mess thins up.
    Some really odd tutorials about motherboards.


    Worst home computer repairs..
    http://www.channelpronetwork.com/article/worst_diy_pc_repairs?page=4#main-content

    You can ruin a motherboard trying  to replace a capacitor.

    https://www.youtube.com/watch?v=Ja-9Z6SscEc

    Worst solder iron you can find.

    https://www.youtube.com/watch?v=SD0Gtm5pEO4

    Make you own external cover.

    http://www.themarysue.com/best-pc-case-mods/

    Now you may think these are all jokes. Really this is how many  people think about DIY computer work. Just dive in and see how much damage you can do!

    If you decide to mess around with computers, be careful about the safety of your own health and your property. In the future more PC components will be modular are will not require the use of a soldering iron. Or even a screwdriver.
    But have fun!  ;D

    camerongray



      Expert
    • Thanked: 306
      • Yes
      • Cameron Gray - The Random Rambings of a Computer Geek
    • Certifications: List
    • Computer: Specs
    • Experience: Expert
    • OS: Mac OS
    Re: Motherboard madness
    « Reply #2 on: October 04, 2015, 02:57:07 AM »
    As long as you are sensible, you'll be fine.  People tend to make out that if you look at a computer component the wrong way it'll break.  In actual fact, unless you physically damage it by dropping it.etc it will most likely be fine.  Static discharge is an issue but is extremely rare and is made out to be a bigger issue than it actually is.  If you handle boards appropriately (i.e. only hold it by the edges and don't touch the individual components/back of the board) you'll be fine and even if you did touch something you shouldn't have, chances of damage are minimal.

    The biggest advice I'd give is to not guess things, if you don't know where something fits or how to install something, look it up, don't guess it!