Welcome guest. Before posting on our computer help forum, you must register. Click here it's easy and free.

Author Topic: Monitor question  (Read 2793 times)

0 Members and 1 Guest are viewing this topic.

barnesvillev

  • Guest
Monitor question
« on: July 08, 2005, 06:28:47 PM »
My monitor has suddenly "faded" out! The picture, etc. is there but is very faded & washed out looking. Hard to read & pics not all there. Exposure is bad?!I checked the brightness, etc. settings & nothing there has changed. What's wrong? thanks, Valarie

merlin_2

  • Guest
Re: Monitor question
« Reply #1 on: July 09, 2005, 09:35:28 AM »
Try a deguass......<<..option listed in the  menu of the monitor......

Valarie Elliott

  • Guest
Re: Monitor question
« Reply #2 on: July 09, 2005, 09:42:49 AM »
How do I do this? Where is this located? Never heard of this before! LOL! Help please!

thanks, Valarie

Raptor

  • Guest
Re: Monitor question
« Reply #3 on: July 09, 2005, 09:48:00 AM »
It is located in the same area where you can adjust monitor weight, height and colours. On your On screen Display

Valarie

  • Guest
Re: Monitor question
« Reply #4 on: July 09, 2005, 01:36:48 PM »
Mine just has symbols. Which one do I try for this? thanks,
Valarie

Raptor

  • Guest
Re: Monitor question
« Reply #5 on: July 09, 2005, 01:46:38 PM »
Most likely and old magnet with a cross or a line through it.

Valarie

  • Guest
Re: Monitor question
« Reply #6 on: July 09, 2005, 02:40:37 PM »
Found it, tried it twice but no change. Any other suggestions? It is a Compaq MV720, older model.

thanks,
Valarie

merlin_2

  • Guest
Re: Monitor question
« Reply #7 on: July 09, 2005, 03:02:04 PM »
How old is this system? type dxdiag in the run box!


What is the refresh rate set at.....update video drivers.

What is the operating system val?

Questions arh.......mean replies ;)
« Last Edit: July 09, 2005, 03:02:29 PM by merlin_2 »

Valarie

  • Guest
Re: Monitor question
« Reply #8 on: July 09, 2005, 04:50:46 PM »
The refresh rate is set at the default level. There is an over ride button but I have no idea what value to put in for the monitor I have. It is a Compaq MV720. OS is ME2000. Pentiumlll processor, 30GB hard drive.

thanks,
Val

Raptor

  • Guest
Re: Monitor question
« Reply #9 on: July 10, 2005, 05:09:47 AM »
Reset the monitor to defaults. Do this from the OSD.

If that does not have a positive effect, test the monitor on another system. If the monitor gives weakened visual there as well, we have eliminated the chance that your hardware is at fault.