Author Topic: Moniter loses signal (Read 13795 times)

Nathan Hall · « **on:** July 20, 2005, 09:12:18 PM »

For the past few weeks I have been having a problem with my moniter losing the signal from the computer the second I try to load higher-end games. Diablo II works fine, but when I try to run games such as World of Warcraft, Battlefield 2, Joint Operations, and NFS Underground.

I switched my graphics card with my friend's to see if that was the problem, but my moniter continued to lose the signal. I have installed new drivers for my video card multiple times and it does nothing. I also have installed the latest DirectX. This also did nothing.

I've been trying troubleshooters but nothing seems to relate to quite to what's happening. The only thing left I can think of being the problem is my motherboard.

Any words of wisdom, anyone?

Thanks

Fed · « **Reply #1 on:** July 20, 2005, 09:42:56 PM »

Quote

I have installed new drivers for my video card multiple times

Where did you get the drivers from?

Nathan Hall · « **Reply #2 on:** July 20, 2005, 10:12:25 PM »

nvidia.com

Fed · « **Reply #3 on:** July 21, 2005, 12:04:07 AM »

Step by step, describe what happens when you try and run a game?

Nathan Hall · « **Reply #4 on:** July 21, 2005, 01:08:31 AM »

Everything is working fine - I can surf the internet, listen to music..anything. With World of Warcraft, when I open it the moniter loses the signal before I even get to the log in screen. With other games I lose the signal after the splash screen. Then I have to manually turn off my computer and turn it back on. Today it actually did it after I tried to run a Java application. I'm stumped.

Another thing, when I select "Restart" it will shut down and then turn its self back on but the moniter does not come back on. When I select "Shut Down" and then turn the computer back on it works fine.

sheriffnathan · « **Reply #5 on:** July 21, 2005, 01:15:33 AM »

This is the same person by the way. I just registered.

Fed · « **Reply #6 on:** July 21, 2005, 01:32:20 AM »

It sounds like a ram problem to me, do you know how much you have & what the configuration is?
1 stick or 2 etc?

sheriffnathan · « **Reply #7 on:** July 21, 2005, 01:36:03 AM »

That could be the problem actually. When I boot up it checks NVRAM every time and it didn't used to do that.

I have 1 stick of 512mb RAM. Not sure about the speed. I could take it out and find out for you if you like.

Fed · « **Reply #8 on:** July 21, 2005, 01:39:04 AM »

Swap it with your friend and give it a try.
Just take normal care for static.

sheriffnathan · « **Reply #9 on:** July 21, 2005, 01:50:09 AM »

No that didn't do it...

Also, when the screen does go black, I hear a high pitched sound shut off. Could that have to do with the hard drive?

Fed · « **Reply #10 on:** July 21, 2005, 01:53:45 AM »

Remember what you did with your video drivers?
Do the same with your sound drivers too.
Gotta run, it's dinner time here.

sheriffnathan · « **Reply #11 on:** July 21, 2005, 02:04:19 AM »

I reinstalled both of those if that's what you mean.

Raptor · « **Reply #12 on:** July 21, 2005, 05:39:19 AM »

1. What type of monitor are you using
2. What type of videocard are you using
3. What drivers/software is installed
4. What is the refresh rate of your monitor set to
-- Are you using ForceRefresh?
5. What resolution is the monitor set to?

sheriffnathan · « **Reply #13 on:** July 21, 2005, 12:09:05 PM »

1. I'm using a Black Elements 17" LCD Monitor, PlanoVision
2. GeForce FX 5900 128mb
3. I've used the drivers included with the card, the drivers from nvidia.com, and installed directx9.
4. 60 Hertz
-- Not that I know of
5. 1152x864

Raptor · « **Reply #14 on:** July 21, 2005, 01:21:56 PM »

Install drivers for the monitor as well.

sheriffnathan · « **Reply #15 on:** July 21, 2005, 02:05:34 PM »

Where can I get those?

Raptor · « **Reply #16 on:** July 21, 2005, 02:06:53 PM »

Try either http://www.driverguide.com or the monitor its manufacturer their webpage

sheriffnathan · « **Reply #17 on:** July 21, 2005, 02:23:05 PM »

Ok, I've installed the driver from that site.

Raptor · « **Reply #18 on:** July 21, 2005, 02:27:25 PM »

You have found the correct driver?

Try using 1024x786x32 at the highest refresh rate that your monitor is capable of.

Fed · « **Reply #19 on:** July 21, 2005, 02:28:15 PM »

~~Turn off 'Automatic Reboot on System Failure'.~~
Forget that LOL.
Can you try your ram in a different slot?

sheriffnathan · « **Reply #20 on:** July 21, 2005, 02:30:52 PM »

OK I did what you said to Raptor, now what?

Where is the Automatic Reboot thing at?

sheriffnathan · « **Reply #21 on:** July 21, 2005, 02:31:13 PM »

Ok, I'll try that

Fed · « **Reply #22 on:** July 21, 2005, 02:32:32 PM »

Forget that, it's not rebooting.

Raptor · « **Reply #23 on:** July 21, 2005, 02:33:56 PM »

Quote

OK I did what you said to Raptor, now what?

Game away and see if it is stable.

sheriffnathan · « **Reply #24 on:** July 21, 2005, 02:35:39 PM »

It is still doing the exact same thing. Switched the RAM too.

Raptor · « **Reply #25 on:** July 21, 2005, 02:40:14 PM »

Can you test the monitor on another computer?

Also be certain that your videocard fans and/or heatsink are not clogged with dust, it may be overheating and shutting down the second you demand performance.

sheriffnathan · « **Reply #26 on:** July 21, 2005, 02:45:20 PM »

Switched the moniter and it works fine on my friend's computer.

I know it's not the video card that's the problem cause I switched that with my friend's too and my computer did the same thing.

Raptor · « **Reply #27 on:** July 21, 2005, 02:57:16 PM »

You may wish to download the latest drivers and install them, but use the following tool once the previous drivers are removed:

Driver Cleaner
-- Removes driver remains after the uninstallation thereof.
-- Read the instructions carefully!

sheriffnathan · « **Reply #28 on:** July 21, 2005, 06:11:24 PM »

Well I did that and now the moniter loses the signal when Windows tries to boot up. Only way it works now is on safe mode.

merlin_2 · « **Reply #29 on:** July 21, 2005, 07:33:44 PM »

Vga mode.....wrong drivers for video adapter card.....roll back the driver...<f8 key on boot safe mode>.how many fans have you got in the case?dont include the graphics fan!

sheriffnathan · « **Reply #30 on:** July 21, 2005, 09:00:21 PM »

Two 80mm fans - One in rear and one on side panel.

Fed · « **Reply #31 on:** July 21, 2005, 09:05:21 PM »

1) Boot the computer in safe mode.
2) Open the 'Device Manager'.
3) Double click on the Display Adapter icon.
4) Highlight the current VGA driver & select 'remove'.
5) Select 'Standard VGA' as display driver.
6) Click OK and close.
7) Shutsown the computer.

Boot the computer.
9) Go to 'Add New Hardare' in the control panel.
10) Follow the instructions & install the latest drivers.

sheriffnathan · « **Reply #32 on:** July 21, 2005, 11:35:05 PM »

It's still doing the same thing. I give up. I'll just buy new stuff until it works I guess haha.

Thanks a ton for all the help though guys.

Raptor · « **Reply #33 on:** July 22, 2005, 11:50:23 AM »

Please do send me the hardware you consider broken!

Computer Hope Forum

News:

Author Topic: Moniter loses signal (Read 13795 times)

Nathan Hall

Fed

Nathan Hall

Fed

Nathan Hall

sheriffnathan

Fed

sheriffnathan

Fed

sheriffnathan

Fed

sheriffnathan

Raptor

sheriffnathan

Raptor

sheriffnathan

Raptor

sheriffnathan

Raptor

Fed

sheriffnathan

sheriffnathan

Fed

Raptor

sheriffnathan

Raptor

sheriffnathan

Raptor

sheriffnathan

merlin_2

sheriffnathan

Fed

sheriffnathan

Raptor