[I'm new here]
Hello all,
I have just built a new PC (parts ordered from Newegg.com) and after I had assembled it I ran into an issue. When I power on the PC it will run for about 30 seconds (with no beeps) then it will power off, then power back on to repeat with the same results. I detached all extra components (HDD, optical, Front Panel Attachments, ect) to perform a POST and I get the same results. I have tried removing the RAM and although I do get a beep error for it, the system will still only run for about 30 seconds then power off and on again to repeat with the same failing results. I have tried using the PSU on another PC and it works without issue. I have reseated the CPU, I have 4 sticks of ram to work with (2x 2GB and 2x 4GB) and I have tried using each stick alone in each slot with no change. I have taken the Mobo and PSU out of the case and placed it on cardboard to test again, but still got the same results. I am out of ideas at this point (aside from returning the CPU and/or the Mobo). Any suggestions are greatly appreciated!
Thanks a bunch all!
P.S. I have attached an image with the parts I have currently connected.
[recovering disk space, attachment deleted by admin]