Welcome guest. Before posting on our computer help forum, you must register. Click here it's easy and free.

Author Topic: Help with NTLDR error  (Read 3066 times)

0 Members and 1 Guest are viewing this topic.

associates

    Topic Starter


    Intermediate
  • I love YaBB 1G - SP1!
    Help with NTLDR error
    « on: December 02, 2009, 05:38:29 PM »
    Hi,

    I need your help. I am getting an error that says NTLDR is missing, press CTRL + ALT + DEL to restart.

    I have been trying to re-install the files by using XP CD installation.

    I press R to recovery console. It asked for administrator password. i entered it in. Then, it comes up with

    D:\WINDOWS>

    I tried to type in as follows

    D:\WINDOWS>copy d:\i386\ntldr c:\
    Access is denied

    I wonder if i have done the right thing here. I got Access is denied message.

    Thank you in advance

    Geek-9pm


      Mastermind
    • Geek After Dark
    • Thanked: 1026
      • Gekk9pm bnlog
    • Certifications: List
    • Computer: Specs
    • Experience: Expert
    • OS: Windows 10
    Re: Help with NTLDR error
    « Reply #1 on: December 02, 2009, 06:37:59 PM »
    To see list of commands in the Recovery console type HELP.
    Two of interest are:
    FIXMBR
    FIXBOOT

    Here is the CH tutorial:
    http://www.computerhope.com/issues/ch000627.htm


    Broni


      Mastermind
    • Kraków my love :)
    • Thanked: 614
      • Computer Help Forum
    • Computer: Specs
    • Experience: Experienced
    • OS: Windows 8
    Re: Help with NTLDR error
    « Reply #2 on: December 02, 2009, 08:08:37 PM »
    The most common reason for this error is when your PC is trying to boot from a hard drive or flash drive that is not properly configured to be booted from; in other words, it's trying to boot from a non-bootable source. This also would apply to media on an optical drive or floppy drive that you're trying to boot from.

    Other possible causes include corrupt and misconfigured files, hard drive and operating system upgrade issues, corrupt hard drive sectors, an outdated BIOS, and damaged or loose IDE cables.

    Fixes for NTLDR Errors

    1. Restart the PC. The NTLDR error could be a fluke.

    2. Check your floppy and optical (CD/DVD) drives for media. Often times, the "NTLDR is Missing" error will appear if your PC is trying to boot to a non-bootable floppy disk or CD/DVD.

    http://pcsupport.about.com/od/fixtheproble...orderchange.htm

    Note: If you find that this is the cause of your problem and it's happening a lot, you might want to consider changing the boot order in BIOS so the hard drive is listed first.

    3. Check the hard drive and other drive settings in BIOS and ensure they are correct. The BIOS configuration tells the computer how to use a drive so incorrect settings can cause problems, including NTLDR errors. There is usually an Auto setting for hard drive and optical drive configurations in BIOS which is usually a safe bet if you're not sure what to do.

    4. Restore the NTLDR and ntdetect.com files from the Windows XP CD. Restoring these two important system files from the original Windows XP CD may do the trick.

    http://pcsupport.about.com/od/fixtheproble...ldrntdetect.htm

    5. Repair or replace the boot.ini file. This will prevent the NTLDR error if the cause of the problem is a boot.ini file that is not configured properly for your Windows XP installation.

    http://pcsupport.about.com/od/fixtheproble...pairbootini.htm

    6. Write a new partition boot sector to the Windows XP system partition. If the partition boot sector has become corrupt or isn't properly configured, you may receive the "NTLDR is Missing" error.

    http://pcsupport.about.com/od/fixtheproble...wbootsector.htm

    7. Repair the Windows XP master boot record. NTLDR error messages may also appear if the master boot record is corrupt.

    http://pcsupport.about.com/od/fixtheproblem/ht/repairmbr.htm

    8. Open your computer's case and ensure that the cable that connects the hard drive to the motherboard is firmly in place. If this does not resolve the issue, try replacing the cable. NTLDR error messages could be caused by loose or malfunctioning IDE cables.

    9. Update your motherboard's BIOS. Occasionally, an outdated BIOS version can cause the "NTLDR is Missing" error.

    10. Perform a repair installation of Windows XP. This type of installation should replace any missing or corrupt files. Continue troubleshooting if this does not resolve the issue.

    http://pcsupport.about.com/od/operatingsys...stxprepair1.htm

    11. Perform a clean installation of Windows XP. This type of installation will completely remove Windows XP from your PC and install it again from scratch. While this will almost certainly resolve any NTLDR errors, it is a time consuming process due to the fact that all of your data must be backed up and then later restored.

    http://pcsupport.about.com/od/operatingsys...nstxpclean1.htm

    If you can't gain access to your files to back them up, understand that you will lose them all if you continue with a clean installation of Windows XP.

    12. Finally, if all else has failed, including the clean installation from the last step, you're most likely facing a hardware issue with your hard drive. Replace the hard drive and then perform a new installation of Windows XP.

    NTLDR Errors Apply To
    This issue applies to the Windows XP operating system, including Windows XP Professional and Windows XP Home Edition. Windows Vista does not utilize NTLDR.

    Geek-9pm


      Mastermind
    • Geek After Dark
    • Thanked: 1026
      • Gekk9pm bnlog
    • Certifications: List
    • Computer: Specs
    • Experience: Expert
    • OS: Windows 10
    Re: Help with NTLDR error
    « Reply #3 on: December 03, 2009, 11:48:17 AM »
    Repeat for N=1 to one hundred
    Quote
    NTLDR Errors Apply To
    This issue applies to the Windows XP operating system, including Windows XP Professional and Windows XP Home Edition. Windows Vista does not utilize NTLDR.
    ;D