blue screen error as physical memory dump

[Yogesh123]

I am frequently getting blue screen saying error as physical memory dump,
what could be the possible problem & how to solve this,
pls advise

[patio]

Post the entire BSOD message including the gibberish...

[Broni]

Download BlueScreenView
No installation required.
Double click on BlueScreenView.exe file to run the program.
When scanning is done, go Edit>Select All.
Go File>Save Selected Items, and save the report as BSOD.txt.
Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.

[Yogesh123]

BSOD message as,
-------------------------------------------------------------------
A problem has been detected and Windows has been shut down to prevent damage to your
Computer.

PFN_LIST_CORRUPT

If this is the first time you have this "stop error screen", restart
your computer. If this screen appears again follow these steps.

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or
remove any newly installed hardware or software. Disable BIOS memory
options, such as caching or shadowing. If you need to use a safe mode
to remove or disable components, restart your computer and press F-8 to
select advanced startup options, and then select safe mode."

Technical Information
Stop: 0x0000004E (0x00000099, 0x000000000, 0x000000000, 0x00000000)

Beginning dump of physical memory.
Dumping Physical memory to disk : 66
----------------------------------------------------------------------------------------

A problem has been detected and Windows has been shut down to prevent damage to your
Computer.

PAGE_FAULT_IN_NONPAGED_AREA

If this is the first time you have this "stop error screen", restart
your computer. If this screen appears again follow these steps.

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or
remove any newly installed hardware or software. Disable BIOS memory
options, such as caching or shadowing. If you need to use a safe mode
to remove or disable components, restart your computer and press F-8 to
select advanced startup options, and then select safe mode."

Technical Information
Stop: 0x0000004E (0x00000099, 0x000000000, 0x000000000, 0x00000000)

Beginning dump of physical memory.
Dumping Physical memory to disk : 66
------------------------------------------------------------------------------------------

[michelsmith]

check your RAM blue screen error may be occured due to RAM.
and let me know

[tobydorji]

This indicates that the memory management Page File Number list is corrupted. Can be caused by corrupt physical RAM, or by drivers passing bad memory descriptor lists.

[Yogesh123]

What is the solution,
How to resolve this?

[tobydorji]

What is the solution,
How to resolve this?

Lets try.Usually BSOD doesnt have 100 percent record of getting solved.Anyway.

1.Test your Ram.

2.If this is the first time you have booted after installing new hardware, remove the hardware and boot again.

This link contains more detailed explanation about your problem.

http://www.osronline.com/article.cfm?article=334

[Broni]

Please, follow instructions from my reply #2.

Usually BSOD doesnt have 100 percent record of getting solved

Disregard the above statement.