Welcome guest. Before posting on our computer help forum, you must register. Click here it's easy and free.

Author Topic: I'm going to try to build my own machine, could use some advice.  (Read 2853 times)

0 Members and 1 Guest are viewing this topic.

jim.mar

    Topic Starter


    Apprentice
  • Long in the tooth, shy between the ears
    • Yes
  • Computer: Specs
  • Experience: Familiar
  • OS: Windows 7
I'm going to try to build my own machine, could use some advice.
« on: September 20, 2010, 01:31:40 PM »
Well the days of Heathkit are long gone but I still like to "do it myself" so I'm going to try and put together my own machine.  I have made up the following list of parts. ..  Would somebody look it over and if they see any glaring discrepancies can you send me a warning?

CASE       Rosewill CHALLENGER   Black               $44.99

PSU      undecided as yet

Motherboard   MSI 870-G45 AM3 AMD 770 ATX AMD        $69.99
·   AM3 socket
·    AMD 770 Chip set
·    4×240pin DDR3  Ram
·   PCI slots (3)
·   PCI Express x1 slot (1)
·   PCI Express 2x16 slots (x16, x4) [2]
·   SATA connectors (4)
·   ID/PATA connector (1)
·   12” x 8.3”

CPU    AMD Athlon II X4 620 Propus 2.6GHz 4 x 512KB L2 Cache    $89.00
Socket AM3 95W Quad-Core Processor
ADX620WFGIBOX
·    4000MHz
·    45 nm Propus
·    4 x 512KB L2 Cache
·   AMD64 is designed to enable simultaneous 32- and 64-bit
HEAT SINK   ARCTIC COOLING Freezer 64 Pro 92mm Ceramic CPU Cooler      $29.99

RAM        CORSAIR XMS3 4GB (2 x 2GB) 240-Pin DDR3 SDRAM   $93.99
DDR3 1600 (PC3 12800)  CMX4GX3M2A1600C9

HARD DRIVE   Western Digital Caviar Black WD6401AALS    $74.99
640GB 7200 RPM 32MB Cache SATA 3.0Gb/s

CD/ROM    ASUS DVD-E818A6T/BLK/B/G             $18.99
Black 18X SATA DVD-ROM Drive - Bulk
·   SATA

CD/DVD BURNER     LG Black 22X DVD+R 8X DVD+RW 22X DVD-R 6X     $19.99
DVD-RW 12X DVD-RAM 16X DVD-ROM 48X CD-R 32X CD-RW 48X
CD-ROM 2MB Cache SATA 22X DVD Burner – Bulk
LightScribe Support

OS     Windows 7  Home Premium   64 bit         $99.99

Total cost aprox. $475 not including MIR's

I have two questions   1) What would be the minimum size required PSU for this configuration?
  and    2)  What do I need to drive the monitor?

I will use this machine to do my ordinary home business, surf the net, record home made music, burn CD's, and play a couple of low key games, like "Flight simulator" and "Big game hunting."
Thanks ahead for reading this and for what ever help you can give.
You are much appreciated..     Thank you ,

jim.mar

    Topic Starter


    Apprentice
  • Long in the tooth, shy between the ears
    • Yes
  • Computer: Specs
  • Experience: Familiar
  • OS: Windows 7
Re: I'm going to try to build my own machine, could use some advice.
« Reply #1 on: September 22, 2010, 01:06:36 PM »
Well, I see a few lookers, but no responders :-\.  If I don't learn anything more (re. my assembling a machine) by tomorrow I will go ahead and order the listed parts. ;D   Thanks for looking and thanks for any help that you can give me. :D...JIM
You are much appreciated..     Thank you ,

Linux711



    Mentor

    Thanked: 59
    • Yes
    • Programming Blog
  • Certifications: List
  • Computer: Specs
  • Experience: Experienced
  • OS: Windows 7
Re: I'm going to try to build my own machine, could use some advice.
« Reply #2 on: September 22, 2010, 01:07:08 PM »
Quote
What would be the minimum size required PSU for this configuration?

Anything above 400W should be OK, cause you said you will only use it for low key games. The more important part, though, is the amount of amperage on +12V. It should be 18A or greater. This should be listed under the specifications if you are using newegg.

Quote
What do I need to drive the monitor?

An nvidia geforce 9500 GT or greater or maybe a 240 GT. That should be sufficient for the games you want to play. Make sure you get a PCI-Express card, not PCI.
YouTube

"Genius is persistence, not brain power." - Me

"Insomnia is just a byproduct of, "It can't be done"" - LaVolpe

jim.mar

    Topic Starter


    Apprentice
  • Long in the tooth, shy between the ears
    • Yes
  • Computer: Specs
  • Experience: Familiar
  • OS: Windows 7
Re: I'm going to try to build my own machine, could use some advice.
« Reply #3 on: September 22, 2010, 01:10:08 PM »
OK, LINUX711,  thank you,  :DI'll start looking right now,  tks again JIM
You are much appreciated..     Thank you ,

jim.mar

    Topic Starter


    Apprentice
  • Long in the tooth, shy between the ears
    • Yes
  • Computer: Specs
  • Experience: Familiar
  • OS: Windows 7
Re: I'm going to try to build my own machine, could use some advice.
« Reply #4 on: September 22, 2010, 01:44:01 PM »
LINUX711;  OK I will order a Rosewill Stallion Series RD500-2DB 500W ATX12V Power Supply..I have been looking at that  for a while.  However, it has two 12v sources, v1 and v2, rated at 15 and 16 amps respectively.  would that do it??
Secondly;  I like the ASUS    EN8400GS Silent/P/512M GeForce 8400 GS 512MB 64-bit DDR2 PCI Express 2.0 x16 HDCP Ready Video Card because it is cheap and does not have a fan.   I don't know what it's GT rating is (9500 or 240) .    What do you think???  JIM
You are much appreciated..     Thank you ,

Linux711



    Mentor

    Thanked: 59
    • Yes
    • Programming Blog
  • Certifications: List
  • Computer: Specs
  • Experience: Experienced
  • OS: Windows 7
Re: I'm going to try to build my own machine, could use some advice.
« Reply #5 on: September 23, 2010, 08:52:54 AM »
Quote
However, it has two 12v sources, v1 and v2, rated at 15 and 16 amps respectively.  would that do it??

Yah, I guess, but I usually like to get PSUs with at least one of those at 18 amps or greater. I think you should look for another PSU. Antec PSUs are my favorite. I got a Rosewill once that I had to send back after the first week.

Quote
I don't know what it's GT rating is (9500 or 240)
Quote
EN8400GS Silent/P/512M GeForce 8400 GS 512MB 64-bit DDR2 PCI Express 2.0 x16

It's an 8400 GS which is worse than a 9500 GT. FYI: 9500 GT isn't it's rating, it's just the model.
As for the 240. That's a different product line, so the numbers are different.
On newegg, under GPU, go to geforce 9 series, that should bring you to a page with some 9500s. They are a little more expensive, but worth it.
YouTube

"Genius is persistence, not brain power." - Me

"Insomnia is just a byproduct of, "It can't be done"" - LaVolpe

WillyW



    Specialist
  • Thanked: 29
  • Experience: Experienced
  • OS: Windows XP
Re: I'm going to try to build my own machine, could use some advice.
« Reply #6 on: September 23, 2010, 10:08:24 AM »
  OK I will order a Rosewill
...

Check out this post:  http://www.computerhope.com/forum/index.php/topic,110105.msg741015.html#msg741015
In it, are listed some brand names of power supplies. 
The poster - "Calum" - is respected, especially in the area of hardware components.
And the post is recent.

.



jim.mar

    Topic Starter


    Apprentice
  • Long in the tooth, shy between the ears
    • Yes
  • Computer: Specs
  • Experience: Familiar
  • OS: Windows 7
Re: I'm going to try to build my own machine, could use some advice.
« Reply #7 on: September 23, 2010, 03:57:41 PM »
LINUX711 and Wiley W;   Thank you both for your help.  I changed the PSU to an ANTEC and I m studying about Video cards.  Didn't realize they were so complicated.   Anyway, thanks again, this forum has helped me through again.   God's Blessings be with you both,    JIM
You are much appreciated..     Thank you ,

Computer CPR



    Beginner

    Thanked: 2
    • Computer CPR
  • Experience: Beginner
  • OS: Windows 7
Re: I'm going to try to build my own machine, could use some advice.
« Reply #8 on: September 23, 2010, 10:20:43 PM »
My only word of caution is on the Rosewill case.  I have ordered them before and they were some of the most brittle plastic I have ever seen.

jim.mar

    Topic Starter


    Apprentice
  • Long in the tooth, shy between the ears
    • Yes
  • Computer: Specs
  • Experience: Familiar
  • OS: Windows 7
Re: I'm going to try to build my own machine, could use some advice.
« Reply #9 on: September 24, 2010, 10:44:21 AM »
My only word of caution is on the Rosewill case.  I have ordered them before and they were some of the most brittle plastic I have ever seen.

OH OH, I may be too late.   Will use extra caution in assembly.  Thanks for he warning....
You are much appreciated..     Thank you ,