Author Topic: Router Wondering Still (Read 6256 times)

squall_01 · « **on:** August 18, 2009, 05:00:55 AM »

I have a linksys router ver 2, there wasnt a manual an I didnt see an adress number on the manual I got from there site. Is there any way too tell to config it?

Carbon Dudeoxide · « **Reply #1 on:** August 18, 2009, 06:23:31 AM »

Go to Command Prompt, type ipconfig and press Enter.

Look for IP Address . . . . . . . : 192.168.xx.xx

For example, mine is 192.168.2.5

To access your router, type in 192.168.2.1 in your Internet Browser.

squall_01 · « **Reply #2 on:** August 18, 2009, 06:43:00 AM »

ah, well I pucnched in a few but I'll try that. The fact that I have dial up shouldnt effect it should it?

Carbon Dudeoxide · « **Reply #3 on:** August 18, 2009, 06:51:14 AM »

Nope.

squall_01 · « **Reply #4 on:** August 18, 2009, 07:43:55 AM »

okay, cause I was getting that when I put them in. Dont it have to be http:// then the number? Sorry, new to this concept. $:-\$

Carbon Dudeoxide · « **Reply #5 on:** August 18, 2009, 07:47:25 AM »

Show me the results of IPCONFIG. Just post the entire command prompt window here.

squall_01 · « **Reply #6 on:** August 18, 2009, 08:57:24 AM »

I will later, storm is coming in an what not.

Carbon Dudeoxide · « **Reply #7 on:** August 18, 2009, 09:03:38 AM »

Why not just do it now so I can quickly help you. It will only take 2 seconds.

squall_01 · « **Reply #8 on:** August 18, 2009, 04:21:34 PM »

Quote from: Carbon Dudeoxide on August 18, 2009, 06:23:31 AM

Go to Command Prompt, type ipconfig and press Enter.

Look for IP Address . . . . . . . : 192.168.xx.xx

For example, mine is 192.168.2.5

To access your router, type in 192.168.2.1 in your Internet Browser.

Its given me a cant display page an wants too connect

$:-\$

Carbon Dudeoxide · « **Reply #9 on:** August 18, 2009, 07:43:00 PM »

Quote from: Carbon Dudeoxide on August 18, 2009, 07:47:25 AM

Show me the results of IPCONFIG. Just post the entire command prompt window here.

BC_Programmer · « **Reply #10 on:** August 19, 2009, 01:26:10 AM »

Squall, use the result from IPCONFIG, not "IP address" but rather "Default gateway"

as an example for me to access my router config I navigate to http://192.168.0.1

Carbon Dudeoxide · « **Reply #11 on:** August 19, 2009, 02:08:26 AM »

Quote from: BC_Programmer on August 19, 2009, 01:26:10 AM

Squall, use the result from IPCONFIG, not "IP address" but rather "Default gateway"

as an example for me to access my router config I navigate to http://192.168.0.1

LOL I can't believe I didn't see that.

My Default Gateway is 192.168.2.1 - which is the address I put into my Internet Browser to access my Router. Okay Squall?

squall_01 · « **Reply #12 on:** August 19, 2009, 06:00:33 AM »

Thats what I was doing. would that then show the IP for that machine

Carbon Dudeoxide · « **Reply #13 on:** August 19, 2009, 06:23:34 AM »

What?

Quote from: Carbon Dudeoxide on August 18, 2009, 07:43:00 PM

Quote from: Carbon Dudeoxide on August 18, 2009, 07:47:25 AM
Show me the results of IPCONFIG. Just post the entire command prompt window here.

kpac · « **Reply #14 on:** August 19, 2009, 08:18:33 AM »

Quote from: Carbon Dudeoxide on August 19, 2009, 06:23:34 AM

What?

You'll get there.......eventually.

squall_01 · « **Reply #15 on:** August 20, 2009, 05:05:56 AM »

Quote from: Carbon Dudeoxide on August 18, 2009, 07:47:25 AM

Show me the results of IPCONFIG. Just post the entire command prompt window here.

Carbon Dudeoxide · « **Reply #16 on:** August 20, 2009, 05:18:21 AM »

Quote from: squall_01 on August 20, 2009, 05:05:56 AM

What the heck is this supposed to mean?

If it's too hard for you, tell us.

Otherwise I'll close the topic because it obviously isn't getting anywhere.

squall_01 · « **Reply #17 on:** August 20, 2009, 11:27:48 AM »

its not you said post everything in ipconfig but wouldnt that then display the ip address for that machine?

kpac · « **Reply #18 on:** August 20, 2009, 12:42:55 PM »

Quote from: squall_01 on August 20, 2009, 11:27:48 AM

its not you said post everything in ipconfig but wouldnt that then display the ip address for that machine?

Yes, and? What difference does that make?

squall_01 · « **Reply #19 on:** August 20, 2009, 04:43:49 PM »

possibly hacking into it

$:-\$

kpac · « **Reply #20 on:** August 20, 2009, 04:45:27 PM »

Quote from: squall_01 on August 20, 2009, 04:43:49 PM

possibly hacking into it $:-\$

Does someone have something against you? You can't actually "hack" as you call it with just an IP.

squall_01 · « **Reply #21 on:** August 20, 2009, 04:46:52 PM »

Not what carbon told me I think that or patio, not too many that I know could do something like that.

Carbon Dudeoxide · « **Reply #22 on:** August 20, 2009, 06:32:59 PM »

It does not show your WAN IP Address. Jeez, just post it already.

Here's mine.

[attachment deleted by admin]

squall_01 · « **Reply #23 on:** August 24, 2009, 04:44:48 AM »

what??? I dont even have wlan, you'll get it later today possibly.

Carbon Dudeoxide · « **Reply #24 on:** August 24, 2009, 05:00:06 AM »

I'll get it later possible? What the heck does that mean?

Jeez Squall. Post your Command Prompt window or I'm locking this topic.

squall_01 · « **Reply #25 on:** August 24, 2009, 05:04:56 AM »

you'll get it later there is no real time to give it now.

Carbon Dudeoxide · « **Reply #26 on:** August 24, 2009, 05:06:08 AM »

Okay bye.

Computer Hope Forum

News:

Author Topic: Router Wondering Still (Read 6256 times)

squall_01

Carbon Dudeoxide

squall_01

Carbon Dudeoxide

squall_01

Carbon Dudeoxide

squall_01

Carbon Dudeoxide

squall_01

Carbon Dudeoxide

BC_Programmer

Carbon Dudeoxide

squall_01

Carbon Dudeoxide

kpac

squall_01

Carbon Dudeoxide

squall_01

kpac

squall_01

kpac

squall_01

Carbon Dudeoxide

squall_01

Carbon Dudeoxide

squall_01

Carbon Dudeoxide