Conner CFA810S specifications
Updated: 06/30/2020 by Computer Hope
Jumper settings
| SCSI_ID | ID1 | ID2 | ID3 |
|---|---|---|---|
| 0 | Out | Out | Out |
| 1 | In | Out | Out |
| 2 | Out | In | Out |
| 3 | In | In | Out |
| 4 | Out | Out | In |
| 5 | In | Out | In |
| 6 | Out | In | In |
| 7 | In | In | In |
CMOS settings
| MODEL (CFS SERIES) | SIZE | CYL | HDS | SECT | WPCOMP | LZONE | Type |
|---|---|---|---|---|---|---|---|
| CFA810S | 810 MB | N/A | N/A | N/A | N/A | N/A | SCSI |
Hard drive specifications
| Formatted capacity (MB=1,000,000): | 810 |
| Cylinders: | 2801 |
| Sectors: | 71 - 113 |
| Heads: | 6 |
| Disks: | 3 |
| Buffer size: | 256 KB, segmented, adaptive |
| Average seek: | 12ms |
| Single track: | 2.5ms |
| Rotation speed / Avg. latency: | 4500 rpm / 7.5ms |
| Transfer rate to/from media: | 27-46 MB/sec |
| Transfer rate to/from buffer: | 6.67 MB / sec |
| TPI | 3200 tracks per inch |
| BPI | 65,000 bits per inch |
| Size: | 1.0" Height x 4.0" Wide x 5.75" Depth |
| Weight: | 1.30 lbs. |
Power requirements
| +12 Volts | +5 Volts | Power | |
| Read/write | 210 ma | 710 ma | 6.0 W |
| Seek | 550 ma | 690 ma | 10.1 W |
| Idle | 180 ma | 460 ma | 4.5 W |
| Standby | N/A | N/A | N/A |
| Sleep | N/A | N/A | N/A |
| Spin up (7 seconds) | 1.6 amp | 720 ma | N/A |